What have you done on your 90/110/130 today?
- Thread starter neilly
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
frog hopper
Well-Known Member
- Posts
- 4,764
- Location
- france
[QUOTE="callisr, post: 4620979, member: 1478"
That bumper looks just great - strong and discreet. I especially like the tapered ends and the fact that it’s not tubular as so many seem to be.[/QUOTE]
Decided I prefered a bit of galv, so just ordered this one.
https://www.paddockspares.com/pm695...modate-most-standard-low-profile-winches.html
That bumper looks just great - strong and discreet. I especially like the tapered ends and the fact that it’s not tubular as so many seem to be.[/QUOTE]
Decided I prefered a bit of galv, so just ordered this one.
https://www.paddockspares.com/pm695...modate-most-standard-low-profile-winches.html
- Posts
- 9,096
- Location
- North Lincs
I made my relay/fuse board out of perspex 
and it's ready to drop in
and it's ready to drop in 
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Thats nice,Me Likey.
I just tuned my FIP a bit more.......Could not do the radius arm bash as the bolt is seized in the internal sleeve, so had to order new bolts, Darn it....LOL.
Cheers
- Posts
- 9,096
- Location
- North Lincs
Does tuning reduce economy over performance? Talking to @Ironstrike he has a boost pin fitted and it goes a lot better than mine
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Does tuning reduce economy over performance? Talking to @Ironstrike he has a boost pin fitted and it goes a lot better than mine
Fitted a boost pin 5 years ago, since then it has had a bit more done. ( Pinned , ringed, wastegate adjusted for more boost 25 Psi, new hybrid turbo, bigger intercooler, and FIP adjusted a few times ) only re-adjusted today as the new intercooler and turbo made me think it needed a bit more fuel when foot to the floor . It does use omroe fuel if you give it beans , or drive it sedatley and it will return the same as before. But I have a heavy right foot and I do enjoy driving it.
Cheers
frog hopper
Well-Known Member
- Posts
- 4,764
- Location
- france
Welded a bit of 2mm to the battery box, I was pleased with this bit of welding. Nothing like a Land rover to give you plenty of practice.
Etch primer coat on new seat box end panel.
Fuel tank and exhaust back on, feels good to be bolting stuff back on, feels like I've turned a corner.
Etch primer coat on new seat box end panel.
Fuel tank and exhaust back on, feels good to be bolting stuff back on, feels like I've turned a corner.
frog hopper
Well-Known Member
- Posts
- 4,764
- Location
- france
Found a rattle can of blue to go over the seat box end, to be honest it could have been any colour it wont be seen anyway, just to use up a can that I've had for years.
Battery box 2nd coated with tractor paint.
Made a start on the tub, corner finisher and capping removed, a bit of mild panel beating to get rid of the worst, I'll splash some etch primer about tomorrow if I have time on the bits that are in contact with crossmember etc. Clean and prep the arches for a coat of stone chip, maybe lift it roughly in place, That would be nice.
Battery box 2nd coated with tractor paint.
Made a start on the tub, corner finisher and capping removed, a bit of mild panel beating to get rid of the worst, I'll splash some etch primer about tomorrow if I have time on the bits that are in contact with crossmember etc. Clean and prep the arches for a coat of stone chip, maybe lift it roughly in place, That would be nice.
callisr
Well-Known Member
- Posts
- 615
- Location
- Burton-on-Trent, Staffs
You don’t hang around!!
Great progress, again!
I put mine back together today.
I’m calling it finished but I will do the wheels green when I get chance.
Also got a few little odds and aids to paint and refit (side antenna mount thingy). Also need to make a plate to cover the holes in the back door where the spare wheel carrier used to live. Hopefully get that done tomorrow.....
Great progress, again!
I put mine back together today.
I’m calling it finished but I will do the wheels green when I get chance.
Also got a few little odds and aids to paint and refit (side antenna mount thingy). Also need to make a plate to cover the holes in the back door where the spare wheel carrier used to live. Hopefully get that done tomorrow.....
Pappasmurf
Well-Known Member
- Posts
- 634
- Location
- Barnsley
Leave the wheels black. Looks loads better.
frog hopper
Well-Known Member
- Posts
- 4,764
- Location
- france
I do like that, looks sort of purposefull.
The wheels look good in black, but have you thought about carrying the camo theme onto the rims?
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
Attempted theft??I didn't do anything, someone else did though
Or wrong key ??
owas
Well-Known Member
- Posts
- 1,213
- Posts
- 9,096
- Location
- North Lincs
I can't press 'like' as I really don't. Glad they didn't get it the thieving scum!!I didn't do anything, someone else did though
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
If you have a seat cover.. piece of wood with panel pins can help getting DNA proof. Don’t forget to remove it when you get in.
Glad it was not taken but keep an eye on it.
owas
Well-Known Member
- Posts
- 1,213
They didn't get through the door lock, god knows how it's not exactly difficult.
Will be alot more careful where I leave it now.
frog hopper
Well-Known Member
- Posts
- 4,764
- Location
- france
Big step forward for me today, got the tub in place at last. splashed some etch primer on the bits that matter before fitting.
Just showing off the stonechip I had sprayed into the arches before fitting. Good job the stuff is cheap, used a can each side, when I bought it I thought I'd get 2 so I could use the 2nd on the front arches. OH well.
It was only when taking those shots that I noticed the joke sign the doris had got me a few years ago. Seems appropriate now.
With any luck the seat box and floor can go in tomorrow, then I shall have to sort out what I'm going to do with the interior of the roof. Will be easier when I've got it on stands upside down, 1st thoughts are to glue some exercise matting first, might make a roof lining from ply and carpet it. I'll see what I feel like when I get to it.
Just showing off the stonechip I had sprayed into the arches before fitting. Good job the stuff is cheap, used a can each side, when I bought it I thought I'd get 2 so I could use the 2nd on the front arches. OH well.
It was only when taking those shots that I noticed the joke sign the doris had got me a few years ago. Seems appropriate now.
With any luck the seat box and floor can go in tomorrow, then I shall have to sort out what I'm going to do with the interior of the roof. Will be easier when I've got it on stands upside down, 1st thoughts are to glue some exercise matting first, might make a roof lining from ply and carpet it. I'll see what I feel like when I get to it.
Similar threads
