discool
Well-Known Member
- Posts
- 13,609
Sod all... no need to do anything, other than wash & polish 
Other what have u done on ur disco today
- Thread starter gstuart
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Going to top up the front diff today, whilst I have a free day.... there's a leak from the inspection plate on the transfer box, so will have to order a new gasket, and give it a bit of a clean off...
Need to take a look at the Disco, as the lack of power is giving me the right hump. Over 2k revs, and its fine, under that its a dog. Hooked u the Nanocom for a motorway run yesterday, and the boost only peaks around 1.14. Is that way too low , as Ive seen numbers around 1.3 quoted on here...
Need to take a look at the Disco, as the lack of power is giving me the right hump. Over 2k revs, and its fine, under that its a dog. Hooked u the Nanocom for a motorway run yesterday, and the boost only peaks around 1.14. Is that way too low , as Ive seen numbers around 1.3 quoted on here...
Lazydave
Well-Known Member
- Posts
- 193
- Location
- Birmingham
Changed auto gearbox and rear diff oil.
- Posts
- 44,833
- Location
- East Dorset
That thing is just too good to be true!
Jonnymoore1970
Active Member
- Posts
- 105
- Location
- Wokingham
Before and after.
I think it’s freshened the front end up nicely. Now considering colour coding the corners of the bumper....
Second hand grill (wrong colour) £30
Paint and lacquer £20
Headlight upgrade (Powerful-UK) £20
Front end mod for not too much money.
I think it’s freshened the front end up nicely. Now considering colour coding the corners of the bumper....
Second hand grill (wrong colour) £30
Paint and lacquer £20
Headlight upgrade (Powerful-UK) £20
Front end mod for not too much money.
looks really nice , are they the xenon lights as I may replace mine at some stage
also done the front grill, got a front bumper to change later , did debadge it as well
are u in springs or air please as it’s a 54/
many thks
Jonnymoore1970
Active Member
- Posts
- 105
- Location
- Wokingham
Still on air and goes up and down everyday no problem. All looks original too, by the state of it. Not bad for 210k miles.
no the lights are halogen I’m afraid. I’d like so Xenons too. I believe that they’re plug and play?
no the lights are halogen I’m afraid. I’d like so Xenons too. I believe that they’re plug and play?
That’s Brilliant condition for that mileage
yep same here, currently got halogens, , , have read u really needs diagnostic for headlights
Jonnymoore1970
Active Member
- Posts
- 105
- Location
- Wokingham
Jonnymoore1970
Active Member
- Posts
- 105
- Location
- Wokingham
Okay, can’t afford them atm anyway. Lol
Plus ur find there plenty here to always help u
Same here , just bought a sliding boot floor for the disco , got to wait for lockdown to lift
Also see ur only around 60 x miles away from me , if u ever get stuck ref diagnostics or need a hand please always feel free to give me a shout
always helped others FOC, so don’t hesitate to give me a shout
have u fitted a D4 steering wheel yet , these have been the nods I’ve done
just know what it’s like to struggle
Same here , just bought a sliding boot floor for the disco , got to wait for lockdown to lift
Also see ur only around 60 x miles away from me , if u ever get stuck ref diagnostics or need a hand please always feel free to give me a shout
always helped others FOC, so don’t hesitate to give me a shout
have u fitted a D4 steering wheel yet , these have been the nods I’ve done
just know what it’s like to struggle
Last edited:
Jonnymoore1970
Active Member
- Posts
- 105
- Location
- Wokingham
That’s very kind of you mate. Much appreciated.
no I haven’t done any other mods....yet.
no I haven’t done any other mods....yet.
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
Threw a bucket of soapy water at it.
Replace timing belt and tensioner plus front cover oil seal, straightforward job except for the broken
Bolts on water pump and one of the four holding the front crankshaft pulley in place,
Now the weather has warmed up will get on with the under seal, messy but necessary job,
Bolts on water pump and one of the four holding the front crankshaft pulley in place,
Now the weather has warmed up will get on with the under seal, messy but necessary job,
Jonnymoore1970
Active Member
- Posts
- 105
- Location
- Wokingham
Painted the corner of the bumpers today. Looks decent I reckon.
Spot1
Well-Known Member
- Posts
- 405
- Location
- Somerset, UK
Finished my latest upgrade to the headlights. The straight row of LED’s at the top is also an animated indicator strip too.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Need to drop the auto box off the D2
Not looking forward to it LOL
Not looking forward to it LOL
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Need to rack up some motivation to get under this thing and fix it..
a few hundred £££ are gonna be needed..
a few hundred £££ are gonna be needed..
