Worth a shot at that money I suppose
. Be interesting to know how well/if it works, so yes I think you really need that.J
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Worth a shot at that money I suppose
. Be interesting to know how well/if it works, so yes I think you really need that.J
- Posts
- 33,600
- Location
- North Shropshire
Mine being the last model year produced, it's the most likely model to need it...
Jon Dor
Well-Known Member
- Posts
- 1,672
- Location
- Beverley, East Riding of Yorkshire
I prefer giving a "tongue-lashing"...if you get my driftStill say warm hands are better and more fun
brianp38dse
Well-Known Member
- Posts
- 20,062
- Location
- heathrow
Have a read of this thread it may well help
https://www.landyzone.co.uk/land-ro...ted-feel-free-to-add-experiences-help.365631/
dubbleRR
Well-Known Member
- Posts
- 1,018
- Location
- highlands of Scotland
You live n learn ,Today after starting my rangerover i though i will top up the screenwash with -8 non freeze stuff,anyway popped the top off reservoir ,got the bottle n started to pour ,BLOODY FAN WAS ROARING N BLEW ME SCREENWASH ALL OVER THE PLACE ,that will teach me ....only range rover could put the filler where the fan blows on startup.. ..
though i will top up the screenwash with -8 non freeze stuff,anyway popped the top off reservoir ,got the bottle n started to pour ,BLOODY FAN WAS ROARING N BLEW ME SCREENWASH ALL OVER THE PLACE ,that will teach me ....only range rover could put the filler where the fan blows on startup.. ..
- Posts
- 33,600
- Location
- North Shropshire
Why would you have the engine running if you're not going anywhere?You live n learn ,Today after starting my rangerover i
dubbleRR
Well-Known Member
- Posts
- 1,018
- Location
- highlands of Scotland
Ah but i was A wee 80 mile run ,with the smell of screen wash up my noise for the first 5 miles or so ,,Why would you have the engine running if you're not going anywhere?
,,and like said be four,hands seats n pussy should be warmed up first thats why it was running ...
- Posts
- 33,600
- Location
- North Shropshire
You're the pussyAh but i was A wee 80 mile run ,with the smell of screen wash up my noise for the first 5 miles or so ,,
should try that in a series with no heater and the snow blowing in past the door seals 
P38 Monkey
Well-Known Member
- Posts
- 628
- Location
- Cambridge
I note a Scottish tone here so the wind is a-swirlin’ and the pipes a-skirlin’ and a draft up yer kilt… that is so “Series”…You're the pussy
dubbleRR
Well-Known Member
- Posts
- 1,018
- Location
- highlands of Scotland
Crikey in must be bad snow and seals ,,,,,,,any penguins
It wasnt plain sailing for me today ether ,,At one point i had to turn the heater up to 22 degrees ..
- Posts
- 6,165
- Location
- North Manchester
That reminds me, I must remember to put some gloves on until my heated steering wheel warms up
P38 Monkey
Well-Known Member
- Posts
- 628
- Location
- Cambridge
You lot are so cruel..!That reminds me, I must remember to put some gloves on until my heated steering wheel warms up
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
I think that's just the cable and you need the software on top. Might be wrong.
Jon Dor
Well-Known Member
- Posts
- 1,672
- Location
- Beverley, East Riding of Yorkshire
Best keep the gloves on just in case the steering wheel doesn't get hot enough...That reminds me, I must remember to put some gloves on until my heated steering wheel warms up
- Posts
- 6,165
- Location
- North Manchester
Scotiawhiskers
Well-Known Member
- Posts
- 877
- Location
- Manchester
Sounds like my heated grips on the bike since fitting handguards too.If anything it gets a bit too hot
Scotiawhiskers
Well-Known Member
- Posts
- 877
- Location
- Manchester
Now half way through rear air spring 2. Old one off in half the time and much less hassle than the first one. Retaining pin snapped like the first so this time used a long coarse round file to cut above the channel and lever it out.
Top mount held in with much crud and rust above and below but determined use of the late father in law's tack lifter got it moving and free.
Now out to rustproof everything before the new bag goes in.
Top mount held in with much crud and rust above and below but determined use of the late father in law's tack lifter got it moving and free.
Now out to rustproof everything before the new bag goes in.
- Posts
- 6,165
- Location
- North Manchester
I found these much better than the hand guards, speshully with the heated grips on as well
Datatek
Well-Known Member
- Posts
- 44,883
- Location
- Near Poitiers SW France
I found these much better than the hand guards, speshully with the heated grips on as well
View attachment 280569
I had heated gloves, still got them actually, just no bike anymoreI found these much better than the hand guards, speshully with the heated grips on as well
View attachment 280569
- Posts
- 6,165
- Location
- North Manchester
Still got mine but the switches kept breaking.
