What did you do with your Range Rover today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kds said:
While part of me would like to agree I have to bear in mind the four post ramp, tyre changer and wheel balancing kit in his work shop all of which I have use of lol, got to say I have driven the J--P couple of times (paper bag on head of course ) before that gearbox went bang its a really smooth change,best thing about it really.
Click to expand...
When I sold the caravan a while ago the buyer turned up in a J**p, when he hitched up and tried to get the van out of its parking spot and on to the drive I couldn't believe how bad the steering lock was on it,he had to shunt so it's front wheels didn't mount the sets and drive onto the lawn. Never had that problem with the P38.:eek:
 
  • Like
Reactions: kds
Ah well insurance renewal time. The quote I got wasn't that bad (£279 fully comp) but being a Yorkshire man I do like to save a bob or 2. Spent a lovely 30 mins on phone with insurance company and amazing what you can get if you say you don't want to renew. Got them down to £230 , fully comp, agreed valuation £3500, 6000 miles a year, protected no claims and all the standard bells and whistles. As we say around here That'll do:D:D:D:D:D
 
kermit_rr said:
Sat on the open tailgate.. clunk.. stood up.. clunk..
Ooh dear.. some more bushes must need replacing :D
Click to expand...

I sat on mine last year, stood up no worries.
My Little brother sat on it, and snap, the cable snapped, oh! the look of guilt & how quickly he moved thinking I was going to give him a slap....LOL.

Priceless...well actually 50 notes from Maltings...But worth it.

Cheers
 
IMG_20211112_094540.jpg


Finally managed to take a picture of the new rims, they gonna look great on her one day!
 
Got to the point of no return by destroying the old abs sensor!! Realised i don't have the technology to get the steel collar out which now seems to be part of the hub :(
 
kermit_rr said:
Got to the point of no return by destroying the old abs sensor!! Realised i don't have the technology to get the steel collar out which now seems to be part of the hub :(
Click to expand...
You don't need to remove the steel bush from the hub, just the thin brass or stainless spring sleeve that holds the sensor.
The Bush may need honing out to get the new sensor and sleeve in. I did this using a bit of dowel split lengthways for about 50mm into which is inserted some wet or dry 600 grade, the dowel is put in an electric drill, dowel inserted into the bush, drill started and move in and out ontil enough rust has been removed to get the sensor & sleeve in, just don't over do it.
 
Datatek said:
You don't need to remove the steel bush from the hub, just the thin brass or stainless spring sleeve that holds the sensor.
The Bush may need honing out to get the new sensor and sleeve in. I did this using a bit of dowel split lengthways for about 50mm into which is inserted some wet or dry 600 grade, the dowel is put in an electric drill, dowel inserted into the bush, drill started and move in and out ontil enough rust has been removed to get the sensor & sleeve in, just don't over do it.
Click to expand...
The sensor outer case and the cage are still in there :D somewhat mangled now.. i went green on it :(
 
Finally got to the point of first head back on, ARP studs in place and first stage torque on the nuts. Second stage tomorrow morning, 3rd stage in the afternoon. 3rd stage repeated on Monday when it has all had settling time.
Learned that trick on old Reliants and Guzzis. Torque down in stages to full torque, then use - 500 mile torque check some head nuts will be barely finger tight. Torque down, leave overnight to settle, re-torque to final values, mostly will go 1/8 - 1/2 turn tighter for that torque, 500 mile check, everything is still sound.
Will be doing the same with inlet bolts and exhaust bolts too. Keep everything as sound and solid as possible for as long as possible.
 
Datatek said:
Not possible to cut the cage IMO. It is possible to put a drill down the centre of the sensor, it then possible to remove the remains of the sensor. Once the sensor is out, the cage as you call it comes out easily.
Click to expand...
I've got a small screwdriver down between the outer case of the sensor and the spring/cage thing, at several points.
All I'm doing is mangling it further.. need some needle nose grips to give it a firm tug. Can't really see what's holding it in place really. It's dark, cold and trying to rain now so I've given up.
Who thought it would be a full weekend to replace an abs sensor!?
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
12
Views
1K
gold rover
gold rover
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
497
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
712
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
790
Grrrrrr
Grrrrrr
Back
Top