What did you do with your Range Rover today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grrrrrr said:
new bolts is because they normally have that blue stuff on them to stop them coming loose. What's it called?!
Click to expand...

Yep blue thread lock:) so it comes pre done so that helps with the stupid HS&E rules:eek: I guess.

Clean it and put your own on:) as has been said.

Works for me, did my prop before finding out they recommended new bolts:eek: no problems since, so I am happy it’s some stupid cya statement in the manual.

J.
 
marjon said:
Yep blue thread lock:) so it comes pre done so that helps with the stupid HS&E rules:eek: I guess.

Clean it and put your own on:) as has been said.

Works for me, did my prop before finding out they recommended new bolts:eek: no problems since, so I am happy it’s some stupid cya statement in the manual.

J.
Click to expand...
Apart from stretch bolts, I have never had a problem reusing bolts. I think the advice about new bolts is all about selling more bolts.
 
Grrrrrr said:
new bolts is because they normally have that blue stuff on them to stop them coming loose. What's it called?!
Click to expand...
Also new bolts because a lot of them are designed to stretch a little and the last thing you want is to sheer one... not that I ever have, I also reuse hub flange bolts on defenders/RRC/disco1 and only occasionally had one or 9 break, over thousands of jobs... that blue stuff that comes on the Fred's is also a bonus.
 
Datatek said:
Apart from stretch bolts, I have never had a problem reusing bolts. I think the advice about new bolts is all about selling more bolts.
Click to expand...

Or a incompetent mechanic that don’t understand it needs thread lock. Cya:)

I don’t get this whole stretch bolt BS. Need to do some reading cos I am on the fence, never needed to worry about bolts in the past, now we do?:confused:

J
 
The rear interior is almost together!

Carpet is getting on my tits though..

Won't go down far enough to allow the sunwoofer cover to go on!!

Short of whacking the carpet with a BFH..

I'm gonna retire today and try tomorra!
 
Checked my Transfer box oil.

I did change it when I bought her..

Will change it again,

Not happy with the colour.

JI6ovyul.jpg
 
gold rover said:
Drove up from London, again. Have been checking mpg. I'm getting approx 29.8mpg on the run. Which considering the start is winding Scottish A roads, rarely getting above 45mph, and the end is Oxford to West London, also lucky to get above 45mph , I think that's an ok return for what she is.
Click to expand...
Not bad My D2 is doing the same.

My RR would do 24 if driven sensibly :eek::D

worst was 6mpg but that was me being nutty.

And a faulty maf and 2 bad O2 sensors made her run rich :D
 
Henry_b said:
Not bad My D2 is doing the same.

My RR would do 24 if driven sensibly :eek::D

worst was 6mpg but that was me being nutty.

And a faulty maf and 2 bad O2 sensors made her run rich :D
Click to expand...

I'm trying to remember my Disco V8 and I'm almost positive she did 24mpg on a long run. Did about 12 around town. Although quite often she used no fuel at all, when not in the drive..



... because she was always in the flaming garage :D
 
gold rover said:
I'm trying to remember my Disco V8 and I'm almost positive she did 24mpg on a long run. Did about 12 around town. Although quite often she used no fuel at all, when not in the drive..



... because she was always in the flaming garage :D
Click to expand...

Yep lol

Mine ain't that bad yet!!

The worst I've had was 18 but that was a horse trailer loaded and some very steep somerset hills ;)

Rangie was very good considering.

Around the Doors IIRC she would get 17 once all the sensors were up to par..

At 56mph on the M5 the best I got was 26.
.

So eh!

But who buys a RR for economy!! ;)
 
Henry_b said:
Yep lol

Mine ain't that bad yet!!

The worst I've had was 18 but that was a horse trailer loaded and some very steep somerset hills ;)

Rangie was very good considering.

Around the Doors IIRC she would get 17 once all the sensors were up to par..

At 56mph on the M5 the best I got was 26.
.

So eh!

But who buys a RR for economy!! ;)
Click to expand...

Certainly not me :)
 
Just returned from a weeks caravanning in Cornwall , 480 miles towing a near two ton caravan and associated equipment and three passengers, I avg 14.2 mpg towing (4.6 THOR) which i was quite happy with considering some of the inclines , most of the route was A27, a31,a35 a30 so not the quickest, I am pleased to report that P38 never missed a beat, everything behaved as it should, the temp gauge stayed smack bang in the middle even on the some of the steeper and longer inclines ( I had flushed the coolant system several times as part of a pre trip service) I used sports mode on the hills which seemed to help, all in all I was very pleased with the way my 19 year old P38 performed
RANGE ROVER PIC.jpg
 
marjon said:
Or a incompetent mechanic that don’t understand it needs thread lock. Cya:)

I don’t get this whole stretch bolt BS. Need to do some reading cos I am on the fence, never needed to worry about bolts in the past, now we do?:confused:

J
Click to expand...

Think you do. Stretch bolts have minimal stretch on fitting they stretch and retract to accommodate expansion and contraction of components. Alloy cylinder heads for example. Thread lock is only a safe guard, mostly used initially in cases were vibration is present on lightly torqued fasteners.
 
wammers said:
Think you do. Stretch bolts have minimal stretch on fitting they stretch and retract to accommodate expansion and contraction of components. Alloy cylinder heads for example. Thread lock is only a safe guard, mostly used initially in cases were vibration is present on lightly torqued fasteners.
Click to expand...

Oh I understand how stretch bolts (or Torque To Yield )work.
My reason for sitting on the fence is why the need & why do so many use them these days ? Cheaper? Allow for less skilled workers?
I think both of the above apply in certain circumstances.

I don’t see the need to push a bolt to near breaking point to get the extra clamping force? Why not use a bigger/better grade of bolt? (Ah cost)

Not that it matters I know I am not going to change the fact or the amount they are used these days.

J
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
12
Views
1K
gold rover
gold rover
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
494
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
712
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
790
Grrrrrr
Grrrrrr
Back
Top