What did you do with your Range Rover today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grrrrrr said:
That aside, what's the cost if you don't go through the insurance?!
Click to expand...
Bout 300ish all in it cost me. The correct screen (BP cheap as possible) and the bond.
I also bought one of these which was invaluable for the removal -
7C49F9AA-499E-4A69-A6EE-E7F2447CC5E9.jpeg(If you do your own il send it to you)
The problem is the top trim. That could be another £150-175 when IF it buckles like a piece of soggy spaghetti. Not a job for the cold weather with all the expensive to replace plastic surrounds but completely doable with patient approach and someone to help drop it in place. Takes quite bit of prep
B43DBE83-8E4C-419C-8656-119C274D19B9.jpegBDB40323-2F50-44BE-B0CC-5A78347C12FF.jpeg
 
Flossie said:
You get a new top trim with autoglass fitted screens included in the excess cost.
Click to expand...
Oh, and that was heated and tinted. I suspect, without any evidence at all, that is all they supply.
So, £135 (or whatever I said, but around that amount) for a tinted, heated screen with a new top trim, fitted. Which is a no brainer , like the mobile muppet who fitted it the first time.
 
RangeRoller dt said:
Bout 300ish all in it cost me. The correct screen (BP cheap as possible) and the bond.
I also bought one of these which was invaluable for the removal -
View attachment 332962(If you do your own il send it to you)
The problem is the top trim. That could be another £150-175 when IF it buckles like a piece of soggy spaghetti. Not a job for the cold weather with all the expensive to replace plastic surrounds but completely doable with patient approach and someone to help drop it in place. Takes quite bit of prep
View attachment 332963View attachment 332964
Click to expand...
Did you paint nearly everything bloody orange😜
 
roythebus said:
No snow here in East Kent, no snow yesterday either, well, there was, but it was big wet flakes that melted upon landing. My Rangie is still with the local garage to change the oil cooler. Should have been ready Friday, but they found a couple of pipes to replace, phoned them today, needs a new thermostat housing so now maybe tomorrow!

I needed the car for work tonight, so now my partner's going to give me a lift to work in her 63 Disco! she'll also come out for a cold ride in my rail replacement bus from Gravesend to Gillingham. Got that job all week!
Click to expand...
Mate of mine was a coach builder for arriva in northfleet and Gillingham at one point.
 
RangeRoller dt said:
Bout 300ish all in it cost me. The correct screen (BP cheap as possible) and the bond.
I also bought one of these which was invaluable for the removal -
View attachment 332962(If you do your own il send it to you)
The problem is the top trim. That could be another £150-175 when IF it buckles like a piece of soggy spaghetti. Not a job for the cold weather with all the expensive to replace plastic surrounds but completely doable with patient approach and someone to help drop it in place. Takes quite bit of prep
View attachment 332963View attachment 332964
Click to expand...

Had you done one before?

I'm a bit nervous of cocking something up!
 
My Rangey is still with the garage. They've done the oil cooler then found the thermostat housing was cracked and needs replacing. Another overnight wait.
 
One step forward and 2 steps back..

Set off to work this morning, rev needle didn’t move for a solid 10s after ignition.. strange then BEEP BEEP. I thought I briefly saw alternator fault and gearbox fault before they disappeared. So engine off and grabbed multimeter.

12.69v engine off, 11.5v engine on. Bollocks.

Thankfully I have a spare alternator I picked up about a year ago. That’ll be my evening then!
 
P38Seb said:
One step forward and 2 steps back..

Set off to work this morning, rev needle didn’t move for a solid 10s after ignition.. strange then BEEP BEEP. I thought I briefly saw alternator fault and gearbox fault before they disappeared. So engine off and grabbed multimeter.

12.69v engine off, 11.5v engine on. Bollocks.

Thankfully I have a spare alternator I picked up about a year ago. That’ll be my evening then!
Click to expand...

Be gentle with the tensioner when you take the pressure off the belt!
 
kermit_rr said:
I only got the glass
Click to expand...
That's strange. Both the mobile guys and the depot in Shrewsbury fitted new top trims . Had to wait 2 weeks for Shrewsbury though as the screen came in a week after my complaint of the shoddy fitted first one but another week for the new trim. 2 new screens, both with trims.
 
Flossie said:
That's strange. Both the mobile guys and the depot in Shrewsbury fitted new top trims . Had to wait 2 weeks for Shrewsbury though as the screen came in a week after my complaint of the shoddy fitted first one but another week for the new trim. 2 new screens, both with trims.
Click to expand...
Found out the other day they didn't even refit all the trim clips properly.. dunno what you call them.. like a hollow split pin that you push another pin down the middle to hold in place.
Missing all the middle pins on both sides
 
You must log in or register to reply here.

Similar threads

W
l322 range rover braking issue
Replies
5
Views
293
pwood999
pwood999
R
86 Range Rover Classic Poor idle
Replies
4
Views
416
Ratae
R
J
Range Rover sport shocks
Replies
9
Views
799
pwood999
pwood999
Maat
P38A Driver's door lock issues
Replies
12
Views
534
Datatek
Datatek
A
Range Rover L322 - not turning over
Replies
12
Views
5K
gold rover
gold rover
Back
Top