:nopics:
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
changed glowplugs the old ones were well passed there sell buy date 
everything on the motor is beyond git tight its more like friken hell thats tight
everything on the motor is beyond git tight its more like friken hell thats tight 
Got to car tonight in work car park only to find remote unlock didn't work. Both fobs recently refurbished and LED was flashing but to no effect from any angle/location. Uh-oh - flat battery? Gingerly opened drivers door with key, lights were in off position and ignition barrel was illuminated so key in ignition and turned... Click of central locking as other doors unlocked and... she started perfectly as always! Didn't dare turn off, so waited until I got home - locks and unlocks on the fob perfectly now.
'She' is definitely female... :scratching_chin:
'She' is definitely female... :scratching_chin:
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
same happened to me sprayed some graphite grease into door and ingnition locks and no probs since touch wood think ignition lock was sticking
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
Checked tyre pressures today bit dull but needed to play with it some how
Khryztal
New Member
- Posts
- 725
- Location
- Felcourt. Surrey
Fitting a new exhaust system and washer bottle
Parisien
New Member
- Posts
- 526
- Location
- Co Fermanagh, N Ireland
Waiting for the parts guy to phone to tell me the throttle heater body repair kit has arrived.........and then to deliver it as I called into them yesterday to find they'd messed up!
P
P
JohnnyCrash
New Member
- Posts
- 1,917
Bought a Crank Position Sensor, will have to wait until tomorrow to fit it though :-(
mudderman
New Member
- Posts
- 81
- Location
- West Sussex England UK
fitted two cable clips round petrol filter adding to the one already in place
touch up paint here n there
drove it usual grin on my face
touch up paint here n there
drove it usual grin on my face
Parisien
New Member
- Posts
- 526
- Location
- Co Fermanagh, N Ireland
...looks third time lucky.......TNT deliveries have taken ineptness to a whole new level.....fingers Xed for Monday
P
3extruckers
Active Member
- Posts
- 216
- Location
- West Yorkshire
Fit winch, roof rack and bull bar.
mudderman
New Member
- Posts
- 81
- Location
- West Sussex England UK
took advantage of good weather
full wax polish
old beast now looks half decent
discreetly glued in side indicators
painted inside exhaust exit ( yeah odd but effective )
full wax polish
old beast now looks half decent
discreetly glued in side indicators
painted inside exhaust exit ( yeah odd but effective )
:nopics:
jonesavpman
New Member
- Posts
- 102
- Location
- Middle of nowhere,close to Rotherham
Fitted 2000 model rear lights :biggrin1: ( look soooo much better than the original orange ones!!) Changed diff oil,replaced gearbox filter and oil, was very puzzled when undoing sump plug that only a drip came out !! Thinking to myself how is the car diving without any gearbox oil? i undid the filler plug which then proceeded to dump oil all over the drive!!! found the magnet in the sump sat squarely over the drain hole!!:doh: All back together now and seems to be driving fine. will be checking oil level again in the morning, when i grease the props!! Hope its not raining!!
!! Thinking to myself how is the car diving without any gearbox oil? i undid the filler plug which then proceeded to dump oil all over the drive!!! found the magnet in the sump sat squarely over the drain hole!!:doh: All back together now and seems to be driving fine. will be checking oil level again in the morning, when i grease the props!! Hope its not raining!!
jonesavpman
New Member
- Posts
- 102
- Location
- Middle of nowhere,close to Rotherham
Greased her props, finally got round to drilling out the rear bumper bolt that i sheared off last year while fitting a tow bar, bumper is nice and straight again!!! Fitted a new bulb to the collar around the ignition switch, lights up at last! Sprayed the light guards and grill matt black,sure looks better than the various shades of grey they were!
All in all a productive day, and a lovely day it was for a bit of tinkering, now for a well deserved beer or two :beer2:
All in all a productive day, and a lovely day it was for a bit of tinkering, now for a well deserved beer or two :beer2:
Attachments
Looks goodGreased her props, finally got round to drilling out the rear bumper bolt that i sheared off last year while fitting a tow bar, bumper is nice and straight again!!! Fitted a new bulb to the collar around the ignition switch, lights up at last! Sprayed the light guards and grill matt black,sure looks better than the various shades of grey they were!
All in all a productive day, and a lovely day it was for a bit of tinkering, now for a well deserved beer or two :beer2:
which primer did you use
jonesavpman
New Member
- Posts
- 102
- Location
- Middle of nowhere,close to Rotherham
I used a no brand (cheapo) 'no primer needed' plastic spray paint, the finish isnt as good as id like so might rub them down and do it again proper over the summer. ( if we have one )
