What did you do with your Range Rover today

Andyp38 · Feb 21, 2014

Fixed the cruise control for the last time i hope !
Replaced the constantly cracking old vacuum hose,with nice new hose.

MrGorsky · Feb 21, 2014

Andyp38 said:
Replaced the constantly cracking old vacuum hose,with nice new hose.

What size hose did you use? I need to do mine, but I'm not sure what to buy.

Stufer · Feb 21, 2014

Andyp38 said:
Fixed the cruise control for the last time i hope !
Replaced the constantly cracking old vacuum hose,with nice new hose.

Recently did mine with shiny blue silicone hose, it's the blingest thing on the car!

thought it was mine! · Feb 21, 2014

Stufer said:
Recently did mine with shiny blue silicone hose, it's the blingest thing on the car!

as long as it's not 20" or 22"s your ok with that mod

Stufer · Feb 21, 2014

MrGorsky said:
What size hose did you use? I need to do mine, but I'm not sure what to buy.

6mm inside diameter, I ordered 3 meters but had a fair bit left over, eBay

Andyp38 · Feb 21, 2014

MrGorsky said:
What size hose did you use? I need to do mine, but I'm not sure what to buy.

Like Stufer said 6mm hose id.
Mine was from a turbo boost gauge kit i'd had.

MrGorsky · Feb 22, 2014

Cheers all.

Stufer · Feb 22, 2014

Rubbed the green gunk off that has been accumulating on the roof. Window seals need doing too. Need a cover for it, never gonna get it in the garage, too much junk.

Thebest4x4byfar · Feb 22, 2014

Fitted new torque converter started at 7 this morning just finished :crazy:

mudderman · Feb 22, 2014

fixed radio with new aeriel
everyday a little job ticked off the list

jipph1 · Feb 22, 2014

Picked top hatted block up and rebuilt short engine

tomcat59alan · Feb 22, 2014

jipph1 said:
Picked top hatted block up and rebuilt short engine

:welcome2:

JAKrangerover · Feb 22, 2014

Does anyone know how to remove the headlight wiper blades on a 1999 range rover?

Thanks

sas1810 · Feb 22, 2014

JAKrangerover said:
Does anyone know how to remove the headlight wiper blades on a 1999 range rover?

Thanks

Lift the cap, undo nut, wobble to get off the arm. Then pull blade out of the arm. Refit is the reverse.

Allyb67 · Feb 23, 2014

Changed transmission oil and filter - can now go up hills !

Herald · Feb 23, 2014

Changed coolant. Very confused as to what replace it with, in the end I went with Glysantin G48 (blue).
Also topped up the gearbox. it took nearly 250ml. Is that excessive? I'll do a complete oil and filter change in the next couple of weeks.

Datatek · Feb 23, 2014

Put the 16" wheels on my P38 so I can get my new tyres fitted to the 18"'s. I'm surprised how knobbly the ride is on the 16"'s, directional stability is good though.

tomcat59alan · Feb 23, 2014

Nothing, just looked at it, sitting at the correct height after standing since yesterday. Very satisfying after I rebuilt the valve block.

mudderman · Feb 23, 2014

polished wood cappings on all four doors with bees wax
measured up for cb radio to fit
touched up small areas of paint
another day another job completed

Parisien · Feb 25, 2014

After the 4.6 sat down on bump stops, and was then diagnosed with a failed rear sensor ( corroded connection), I got it changed last night, after start up she picked herself up pretty sprightly and was very level all around.

Also got a bulb changed and located the slight burning smell was a sticking caliper, more to do.

P

What did you do with your Range Rover today

Active Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

New Member

New Member

New Member

Well-Known Member

New Member

New Member

New Member

Member

Well-Known Member

Well-Known Member

New Member

New Member

Similar threads