- Posts
- 6,165
- Location
- North Manchester
New Ring Automotive RSC806 Smart Battery Charger arrived this afternoon and battery now up to 12.94v. It's a nice constant voltage, none of that pulsing crap.
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
New Ring Automotive RSC806 Smart Battery Charger arrived this afternoon and battery now up to 12.94v. It's a nice constant voltage, none of that pulsing crap.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
What's the voltage when its been off charge for a while?
- Posts
- 6,165
- Location
- North Manchester
Normally about 12.6v but I think the new cheapo chinese FBH remote keeps kicking in and draining it.
Sad times man.
- Posts
- 33,600
- Location
- North Shropshire
Trying to figure out how to resolder the bcm screw connectors on the fuse board...
Is that the 3 nuts at the front of the pic?
If it is, you have to de-solder them, and clean them (using leaded solder) with a copper braid to get all the solder off, then get some lead based solder (Flows better) then tin the pads, and apply the solder on the pads, and solder them on
- Posts
- 33,600
- Location
- North Shropshire
Yes the 3 underneath the fuse box labelled bcm 1 2 and 3.
Seems like a mammoth task to split the 2 halves, well above my pay grade
- Posts
- 33,600
- Location
- North Shropshire
They do look like nuts, but soldered from the other side
Hmmm Bu**er
I am surprised, she said keep it, because she knows how much it means to me, can't fault herThought you had managed to “man math” it to the boss.
Shame after all your work.
J
What like Now? After you said you gonna sell it?
So it’s not for sale then
She’s a keeperWhat’s she just bought
J
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
@biketeacherdave did mine due to my loss of dexterity, your best sniping through the pins so the "sandwich " can be opened up then resoldered after the repair. May be worth a pm if you don't fancy trying it. Could be a full-time job Dave.
- Posts
- 6,165
- Location
- North Manchester
When I was in the trade a looooong time ago I used a solder sucker and found it better than the braid.
- Posts
- 33,600
- Location
- North Shropshire
You've lost me, what is braided?
- Posts
- 33,600
- Location
- North Shropshire
Snipping sounds like a good plan!! I do wonder how brittle the fold is though@biketeacherdave did mine due to my loss of dexterity, your best sniping through the pins so the "sandwich " can be opened up then resoldered after the repair. May be worth a pm if you don't fancy trying it. Could be a full-time job Dave.
- Posts
- 6,165
- Location
- North Manchester
