Panel Beater
Traction Control.
- Thread starter Rob Edge
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Panel Beater
Would a 97 manual DSE have the LT95. I suppose that is a possibility.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
no borg warner
Don't make assumptions that you know squat about. I am actually a refinish technician who also happens to be the MD:multiply:
Any quick way of differentiating.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
borg warner chain drive with viscous coupling only transfer box fitted to p38
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
I'm not arguing that TC was an option on some low spec models, my concern is you think you have an LSD diff. I can find no reference to them being fitted in any Rave manual, Range rover.net or the bible that is James Taylors Range rover the second edition.
StuckAgainSteve
Well-Known Member
- Posts
- 2,276
- Location
- London
Surely James was referring to the classic in relation to the LT95?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
i was ,it has the only lsd diff lr used but not in an axle and then not for long i believe ive only ever seen 3
- Posts
- 58,170
- Location
- Preston Lancs.
I have never seen or heard of a LSD diff fitted to the axle of a P38. However the centre diff could be regarded as limited slip.
Not that one then.
Contrary to popular belief Land Rover can be helpful at times. I have no idea if it has an LSD only that Land Rover specified it had one due to it not having TC.
Sorted.
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
I really need to see this text to believe what your putting in my ears. Someone out there must have a owners manual from an early model.
I think we are getting crossed wires. In the handbook it says TC might not be fitted and when I asked at LR they say it hasn't got TC but it has got LSD. I am beginning to think it might be the centre diff to which they are referring.
StuckAgainSteve
Well-Known Member
- Posts
- 2,276
- Location
- London
My Brother had an early 80s Audi 80 which stalled when you stopped, but wouldn't stall if you coasted in neutral and then started itself up again if you touched the throttle - Bizarre, I traced all the wiring only to discover it was supposed to do it! Solenoids and actuators all over the place, the conclusion I came to was it was an experimental car that somehow avoided the crusher. These days of course stop/start systems are everywhere! Non-production cars do slip through the net occasionally!
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
Bingo bango.
- Posts
- 58,170
- Location
- Preston Lancs.
The 1995 electrical manuals. ABS system has traction control as standard there is no alternative modulation unit as far as i can see. So basically ALL P38s have traction control. Early two wheel after 99 four wheel.
The non TC models have different wiring and a different ecu on the ABS according to LR.
StuckAgainSteve
Well-Known Member
- Posts
- 2,276
- Location
- London
In the ETM manual it does say:
"ABS Booster Unit (Z103)
The ABS Booster Unit (Z103) contains 2 isolation
solenoid valves and 4 pairs of solenoid control
valves which are grounded through the harness.
When the ETC is fitted, the booster unit also
contains an additional 2 solenoid valves. The pairs of
solenoid control valves each include a fluid pressure
inlet and outlet valves that control ABS braking to
one wheel."
Interesting!
"ABS Booster Unit (Z103)
The ABS Booster Unit (Z103) contains 2 isolation
solenoid valves and 4 pairs of solenoid control
valves which are grounded through the harness.
When the ETC is fitted, the booster unit also
contains an additional 2 solenoid valves. The pairs of
solenoid control valves each include a fluid pressure
inlet and outlet valves that control ABS braking to
one wheel."
Interesting!
