Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Britpart? 
SECOND time this has happened.
Hmmm.
SECOND time this has happened.
Hmmm.
The Big Debate - Britpart or S**tpart?
- Thread starter BuzzLand
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
timtheenchanteruk
Well-Known Member
- Posts
- 4,633
- Location
- Leeds
had a couple of non mechanical bits, one being a pair of extended mirror arms (with mirrors) bought them in August, one failed in Jan, the arm wouldn't lock into place. paddocks were ace tho and sent a replacement within a few days, got to keep tyhe old one, so got a spare mirror head
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
Britpart?
SECOND time this has happened.
Hmmm.
fookin ell noisy lol, bet that was a barstool to recover lol
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
I have fitted a Britpart lift kit and seams to bo ok, not done much with it due to a full rebuild, during the rebuild I got some outer arches with britpart on them and they fit a treat.
NorthSea92
New Member
- Posts
- 170
- Location
- Scotland
I've only used one britpart thing and it will be the last.
Replaced the tailgate struts on my P38 with britpart ones. Only a tenner for the pair and not much to go wrong with gas struts.
Lasted for a couple of days before one snapped
Replaced the tailgate struts on my P38 with britpart ones. Only a tenner for the pair and not much to go wrong with gas struts.
Lasted for a couple of days before one snapped
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
i had 2 of those last year
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
its for gaylanders so you think you can keep up with proper landies
howardo
New Member
- Posts
- 6,783
- Location
- In the woods
its for gaylanders so you think you can keep up with proper landies
a proper landy wouldn't get close to a v6 freelander
- Posts
- 7,925
- Location
- East Midlands
I have a large Britpart cardboard box that I've flattened out and use as a makeshift kneeler or lying down thing when I work on the Land Rover outside my house. It's a bit embarrassing when people go by who might know anything about Land Rovers, but it's mechanically excellent after three months and I have no complaints.
The stuff that came in it is a different story.
The stuff that came in it is a different story.
lorri789
Well-Known Member
- Posts
- 4,657
- Location
- West Stirlingshire
Never thought about that. The cardboard boxes are pretty good.
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
You could always clean a paint brush off over the writing, problem solved
- Posts
- 7,925
- Location
- East Midlands
I was sitting on my Britpart cardboard box yesterday mending my brakes and a young man came past and started chatting about Land Rovers and how he likes to take his 200 TDI wading etc. I tried to make sure my arse was over the writing, because it sounded like he knew what he was talking about. I think I got away with it.
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Ball snapped off so me and my mate had a stand about for a few minutes for a laugh and a brew, then cracked on and repaired it there and then.
4 hours later we drove out of the forest to much amazement of any bystanders!
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
If he puts your windows through at least you know why!
As it happens I drove past Britpart at craven arms yesterday on my way home, MASSIVE place!
brian47
Well-Known Member
- Posts
- 8,867
Replaced some brake and clutch parts with Britpart bits yesterday.
So far, no problems, don't expect any now either.
The parts replaced:
Pedal rubbers!
So far, no problems, don't expect any now either.
The parts replaced:
Pedal rubbers!
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
lorri789
Well-Known Member
- Posts
- 4,657
- Location
- West Stirlingshire
:lol:
If he puts your windows through at least you know why!
As it happens I drove past Britpart at craven arms yesterday on my way home, MASSIVE place!
I had a look on Google Earth and it is indeed a massive place.
"Britpart operates from a prestigious 55 acre site in Shropshire, which includes all our manufacturing, warehousing and administration."
philvy
Well-Known Member
- Posts
- 2,288
- Location
- Frankfurt, Germany
no costumer service and no returns department. "we store 'till just before dem break. then we ship 'em."
Station House
Well-Known Member
- Posts
- 3,960
- Location
- Fife, Scotland
Similar threads
