bankz5152
Well-Known Member
- Posts
- 9,329
- Location
- South London/North Kent
Where you get those ramps! They look good
TD5 90 Project
- Thread starter KISSMYAURA
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Ebay about 5 -7years ago
They are genuine Carstages ones, plenty of dangermouse cheapos out there so beware etc.
Just enogugh room to scoot about on a garage stool on wheels, plenty of room to drop gearbox transfer etc
carstages / showroom events
set on there now for £350 or so they are fooookin heavy by the way! and they are very long 4.5m plus
Its a right giggle driving up to the sky cant see anything then BANG down you go!
ebay carstages
They are genuine Carstages ones, plenty of dangermouse cheapos out there so beware etc.
Just enogugh room to scoot about on a garage stool on wheels, plenty of room to drop gearbox transfer etc
carstages / showroom events
set on there now for £350 or so they are fooookin heavy by the way! and they are very long 4.5m plus
Its a right giggle driving up to the sky cant see anything then BANG down you go!
ebay carstages
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
5 ton logs & 15 smokless coal 10 bags of kindling delivered from farm next door.
1000 Ltrs of lpg due tomorrow.
Dexer dog is happy now for winter
Mrs is not cos of the mess pmsl!
1000 Ltrs of lpg due tomorrow.
Dexer dog is happy now for winter
Mrs is not cos of the mess pmsl!
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Stove refurb, new grates, new fire bricks general clean up.
Flue and insultated stack got new fire cement, (I use stovax mastic with a gun)
Over 11 years the middle grate had bent / sunk ( caused by over fireing with smokeless and choke plate not fitting properly.
Then a quick blat over with stovax black spray paint.
Burnt in all day today, the smell is horrendous but should be gone by the morning.
All ready for winter, I cant stand central heating.....
Flue and insultated stack got new fire cement, (I use stovax mastic with a gun)
Over 11 years the middle grate had bent / sunk ( caused by over fireing with smokeless and choke plate not fitting properly.
Then a quick blat over with stovax black spray paint.
Burnt in all day today, the smell is horrendous but should be gone by the morning.
All ready for winter, I cant stand central heating.....
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Installed Dodo sound deadening mat to the rear tub, pics to follow
bankz5152
Well-Known Member
- Posts
- 9,329
- Location
- South London/North Kent
Makes a big difference in the boot! Also worth adding some 6mm closed cell foam over the top then the rubber matt or carpet.
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
aye i use those closed cell interlocking mats.
did the ceiling and sides a few years ago, but then did the panoramics etc.
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
very annoying squeak from rear, foxed me for a bit, solved it. Rear door rubber 
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Bit more winter prep, rubber lube to doors seals, graphite powerder to locks, washer changed to the arctic stuff.
Below zero ready!
Below zero ready!
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
@Hicap phill
And they do work well
see below, finally found em, jokers on ebay asking £150 FFS parasites.
demisters
And they do work well
see below, finally found em, jokers on ebay asking £150 FFS parasites.
demisters
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
A few thousand miles on since pano and new cross member....
1988smithy
Well-Known Member
- Posts
- 4,048
- Location
- West midlands
Tidy landy that 
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
LOF HD clutch and SM flywheel is a game changer, superb very pleased!
New passenger door next me thinks.
New passenger door next me thinks.
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Wolf Style air intake.
Finally bitten the bullet and ordered one, always liked the style, and have been after one for a while.
Of course it will be sprayed with Raptor in black.
Finally bitten the bullet and ordered one, always liked the style, and have been after one for a while.
Of course it will be sprayed with Raptor in black.
Last edited:
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Application of Buzzweld adhesion promoter / plastic primer.
Last edited:
Stone56
Well-Known Member
- Posts
- 3,291
- Location
- Up a mountain
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Weird stuff that adhesion promoter i swear its just hairspray!
Anyway heres the first cost of Raptor, shot it it closer than normal for the first coat, second will be rougher finish
Anyway heres the first cost of Raptor, shot it it closer than normal for the first coat, second will be rougher finish
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
its weird stuff, so globby you have to make sure you have actually covered everthing, first time i used it there were places where it did not take like orange peel so i assumed i had buggered up the primer and had a mismatch etc, then realised this was normal and after application it shrinks just a tad and this is with a shutz gun and from a meter away. Most peeps even after reading the instructions still dont shoot it from far enough away. Proper feshional now i is!
I love the finish you get with it, even on plastics that flex its the only bed liner than can accomodate flex without pinging bits off.
I might fit tomorrow its just too fookin windy n cold at the moment
I love the finish you get with it, even on plastics that flex its the only bed liner than can accomodate flex without pinging bits off.
I might fit tomorrow its just too fookin windy n cold at the moment
KISSMYAURA
Well-Known Member
- Posts
- 2,818
- Location
- KENT
Et voila!
