KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
Lowered / Stretched or both? 
TD5 90 Project
- Thread starter KISSMYAURA
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 9,105
- Location
- Roaming the UK on assignments
I think the stretched safari wagon looks cool but could you imagine negotiating Swindon in that thing
It would struggle with the potholes but the magic roundabout would be fun!I think the stretched safari wagon looks cool but could you imagine negotiating Swindon in that thing
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
magic roundabout might be fun....I think the stretched safari wagon looks cool but could you imagine negotiating Swindon in that thing
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
I want the stretched one!!!
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
Sequential Indicator Side Repeaters arrived in postbox today!
Its an LED illness @bankz5152 understands......
Its an LED illness @bankz5152 understands......
bankz5152
Well-Known Member
- Posts
- 9,300
- Location
- South London/North Kent
Ahhhhhhh they are cool! Where did you get them?
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
You have to fit one upside down of course, as they left-to-right directional sweep, but are not handed.
They have the usual dot and E marks, which of course may or may not have any relation to the legal meaning of such marks!
The chipset and board is generic and has been fitted to a Defender side indicator moulding, although its a very nice job, nice seams etc.
I saw them about 4 months ago for VW/Audi, i got a set for my VW caddy, for half the price popped one open etc and decided to try to fit one to a defender moulding, just never got round to it, spotted these guys had already done it so grabbed a set.
Price is a little steep but i guess they will cash in until everyone else starts making them....
If you buy smoked lenses for standard bulbs and the led ones for a VW you could make your own for 1/3 of the price ..
However there is the 'canireallybearssed' factor...
Last edited:
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
So if you go down in the woods today.............................. needed a decent 'hard standing' for my truck, say hard standing soon to be fookin great car port (tis only a schmall one 10x5m) which will then evolve into a garage with a 2 post lift, but shhhh mrs is listening so one thing at a time. That was this weekend, concrete shows up on Thursday, got me mates over to rake n tamp etc so going to bust out the BBQ/ n Beer, we are starting our bank holiday a day early so this got to be earliest BBQ ever, still its the easiest way to do brekkie and lunch for 4 lumps like us etc.
Bet one of em leaves a welly in there....
Bet one of em leaves a welly in there...
.
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
I have gone for C40 mix with poly fibers (FRC) .
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
LOL heavy enough to squash me flat if it fails!C40 + FRC + Rebar ...... How heavy is your truck?
Also work on old yank pick ups so if yer gonna do something might as well over kill etc its the clarkson in me.....
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
F150's 68-75
F100's i mean sorry!
Last edited:
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
Last edited:
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
Cheers Gents,
Appears I have over engineered the base, QED I am very happy.
Just spent the last two days removing tree canopy to get the 3.8m tall volumetric turk up here.
Poxy long run then a 50m dirt hill then a 50m flat then another 50m hill joys of living in a valley on a wooded plateau etc. Me n me mates standing on the roof of the 90 swinging chainsaws, long pole loppers and chucking ropes over stuff then engaging diff lock, I come from the the Clarkson school of tree trimming..... POW....ER!!!! and a long strap.
For todays fun and frolics we had to remove a dodgy RSJ that had been gas axed and then had a 50mm box section bolted to it for good measure to create a pants gate post for some pre war dodgy wrought iron gates. So the volumetric truck can get up here.
They are nice and come complete with crud n plop coloured corrosion.
The gates have long since been pinned back and we only found them 3 years ago when they nearly blew up my sthil hedge trimmer...again the hedge lost and got hit with death juice So no trace now!
So armed with a small compressor, a 240v Genny and a plasma cutter off we went.
Used a flapper dis to get to the shiny stuff honestly the RSJ had been totally butchered with a gas axe years ago make a fence post kind of thing, you can see it on the ground int he pics, its 8 foot long almost or was! Don't you love bloody bodge farmers!
Soon discovered the generator was not up to the job, we kind of got through it but just as we blew through to do some serious damage we lost the arc, so plan b'ed it with a 9" grinder and dug in for a war.
Suffice to say the post lost, and I still have my toes, my mate on the other hand whilst physically intact did end up with an interesting effect of his blue puffa jacket....he looks like he is from the 80's and had a serious squishy black ganja habit!.
The gates need repairing and may scrub up well but really need to be dipped and to be honest I cant be fooking be arsed, plus I hate the things anyway, this is not TOWIE!
I think they might be relocated and may used them to grow cucumbers etc.. however they will be lashed together and dragged by the fender cos they are kin heavy.....
Appears I have over engineered the base, QED I am very happy.
Just spent the last two days removing tree canopy to get the 3.8m tall volumetric turk up here.
Poxy long run then a 50m dirt hill then a 50m flat then another 50m hill joys of living in a valley on a wooded plateau etc. Me n me mates standing on the roof of the 90 swinging chainsaws, long pole loppers and chucking ropes over stuff then engaging diff lock, I come from the the Clarkson school of tree trimming..... POW....ER!!!! and a long strap.
For todays fun and frolics we had to remove a dodgy RSJ that had been gas axed and then had a 50mm box section bolted to it for good measure to create a pants gate post for some pre war dodgy wrought iron gates. So the volumetric truck can get up here.
They are nice and come complete with crud n plop coloured corrosion.
The gates have long since been pinned back and we only found them 3 years ago when they nearly blew up my sthil hedge trimmer...again the hedge lost and got hit with death juice So no trace now!
So armed with a small compressor, a 240v Genny and a plasma cutter off we went.
Used a flapper dis to get to the shiny stuff honestly the RSJ had been totally butchered with a gas axe years ago make a fence post kind of thing, you can see it on the ground int he pics, its 8 foot long almost or was! Don't you love bloody bodge farmers!
Soon discovered the generator was not up to the job, we kind of got through it but just as we blew through to do some serious damage we lost the arc, so plan b'ed it with a 9" grinder and dug in for a war.
Suffice to say the post lost, and I still have my toes, my mate on the other hand whilst physically intact did end up with an interesting effect of his blue puffa jacket....he looks like he is from the 80's and had a serious squishy black ganja habit!
.The gates need repairing and may scrub up well but really need to be dipped and to be honest I cant be fooking be arsed, plus I hate the things anyway, this is not TOWIE!
I think they might be relocated and may used them to grow cucumbers etc..
however they will be lashed together and dragged by the fender cos they are kin heavy.....
Last edited:
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
both! we have a dodge polara and a lincoln to play with as well.....will put up on the anything goes forum wnat to keep this for the fender n garage really etc
