Tailgate Window

T

Tommo21uk

New Member

Posts

7

• Jan 20, 2011

• #1

Hi guys sorry if this has been covered before and thanks for all the help in advance to cut long story short I changed my tailgate window mechanism the full thing cables and motor on my freelander 1 the problem is it all works fine but when putting the window up I have to push the window inwards at the top or the window will hit the black plastic surround how do I adjust the window so it will clear it at the top cheers Tj

 

Last edited: Jan 20, 2011

Optimus Prime

Well-Known Member

Posts

5,988

Location

Garden of England

• Jan 20, 2011

• #2

it may be the angle of the regulator guide rails. did you miss out / drop any washers when you took it out / put it back ?

you could try packing out the top two bolts with a washer between the regulator rail and the inside of the tailgate outer door skin, this may angle the assembly in enough to clear the trim strip

 

W

wayne john

New Member

Posts

1

• Jan 23, 2011

• #3

hi the rails move in and out on the mounting bolts as you do up the bottom bolt the rail top moves out so turn antclockwise did mine friday

 

T

Tommo21uk

New Member

Posts

7

• Jan 24, 2011

• #4

Hi thanks for the replay could you tell me what you mean by the mounting bolts are these the bottom two large ones many thanks Tj