swapping rear rectangular foglight for a round one?

albinoni · Jan 6, 2012

Hi, I'm doing some paint repairs and need to take the rear fog light off - given that I can't get the nuts off from the inside and that replacments are cheap, i'm going to enjoy butchering it off for a change.
It's a '99' td5 with rectangular lights and i was wondeing if anyone knew if the round style will fit, using the same screw holes?
Any advice greatly appreciated, as always.
Cheers
Andy

Land Rover NAS or TD5 Defender Rear Fog light / lamp | eBay

red-september · Jan 6, 2012

even if the screw holes don't line up; the new lights round, just turn it round.. drill some new holes fill the old with silicone and bang it on.. the light will hide the old holes anyway and there ya go; no-one will know!

GINGE · Jan 6, 2012

lol ^^^^^

Im going to be doing this soon as i currently dont have a rear fog light due to a hi lift jack being mounted there. Im going to change the reverse light also as i think it will look a little odd with one being rectangular and one being round.

Ill keep my eye on this.

Post piccies wont cha? we like piccies.

Dave90 · Jan 6, 2012

albinoni said:
Hi, I'm doing some paint repairs and need to take the rear fog light off - given that I can't get the nuts off from the inside and that replacments are cheap, i'm going to enjoy butchering it off for a change.
It's a '99' td5 with rectangular lights and i was wondeing if anyone knew if the round style will fit, using the same screw holes?
Any advice greatly appreciated, as always.
Cheers
Andy

Land Rover NAS or TD5 Defender Rear Fog light / lamp | eBay

I've done it, from what I remember the normal center hole is fine, but all you need to do is drill other ones for the new screws, so at the worst it's two holes to drill

Dave90 · Jan 6, 2012

albinoni said:
Hi, I'm doing some paint repairs and need to take the rear fog light off - given that I can't get the nuts off from the inside and that replacments are cheap, i'm going to enjoy butchering it off for a change.
It's a '99' td5 with rectangular lights and i was wondeing if anyone knew if the round style will fit, using the same screw holes?
Any advice greatly appreciated, as always.
Cheers
Andy

Land Rover NAS or TD5 Defender Rear Fog light / lamp | eBay

Just been out to have a look

Don't think the existing screws will work, You can see from the picture that the (Imagine a clock) '1:30' and '7:30' holes are being used, unless the TD5 rectangle rear lights have the same fixing method, this is on my 1992 Defender. You Can't see any evidence that it has been drilled, I put waxoyl in the old holes to help stop any corrosion, btw I have twin fogs and reverse lamps

Hope this helps Andy

Dave

albinoni · Jan 6, 2012

Thanks guys/Dave!
Sounds straight forward enough - I'll get it ordered!
Just finished a days work on that Landy and my hands are trashed - i'm gonna soak them in something warm

Cheers
Andy

albinoni · Jan 10, 2012

Well - fitted the light today! The centre hole was way too small so i had to grind out a new one (which didn't feel right, even though you can't see it) drilled the 2 new screw holes, but now need a connector and wire as the old one was just wired straight to the old fog light! Don't know where I'll get one of these from? any suggestions welcome!

mark-d · Jan 10, 2012

:nopics:

albinoni · Jan 10, 2012

Mmm! Good point - didn't think of that. I think I've found one...

Genuine 2 way Connector for NAS/300tdi/Td5 light 90/110 | eBay

Will take a pic of the finished thing.
Cheers
Andy

The Mad Hat Man · Jan 10, 2012

i have a made up cable adapter if yu want at work. saves you buying the tooling to make it

We make the two wire and the three wire versions..... Plug to bullet connectors...

albinoni · Jan 14, 2012

The Mad Hat Man said:
i have a made up cable adapter if yu want at work. saves you buying the tooling to make it

We make the two wire and the three wire versions..... Plug to bullet connectors...

Thanks Mad Hat Man, When I read this, I'd already ordered new connectors from the guy I bought the light from, otherwise, would have taken you up on the offer.
Thanks again.
Andy

GINGE · Jan 14, 2012

Albinoni,

Can you post the ebay kit you used please?

I need to do this really as my MOT is due soon. My fog light is just 2 bare wires though so i dont think ill need an adaptor. Ill just bare back the wires from the reverse light aswell.

Thanks

Matt

albinoni · Jan 25, 2012

Hi Matt, sorry for delay - not been on thsi past week.
This is the link - I had to file out the hole to accomodate the bigger fitting - but that was okay - It has a connector on, so it might be best to ask the seller for the connector kit - it's an easy fit and they will throw it in with teh same postage as the lamp.
Andy

Land Rover NAS or TD5 Defender Rear Fog light / lamp | eBay

swapping rear rectangular foglight for a round one?

albinoni

New Member

red-september

Active Member

GINGE

Greenlane liker, bobble hat hater

Dave90

Well-Known Member

Dave90

Well-Known Member

Attachments

albinoni

New Member

albinoni

New Member

mark-d

Well-Known Member

albinoni

New Member

The Mad Hat Man

Well-Known Member

albinoni

New Member

GINGE

Greenlane liker, bobble hat hater

albinoni

New Member

Similar threads