Disco 2 Stock ride height

stustrong said:

Has anyone got the measurements for stock ride height.
7 seater
Rear air.
475mm front
485mm rear
Measured from hub to wheel arch lip. This sound correct ?

Click to expand...

discool said:

Don’t hold your breath as u may have found out elsewhere those details aren’t listed by LR.

Click to expand...

sierrafery said:

The heights are listed in the WSM - General data - Suspension


Nominal height from hub centre to wheel arch (not liner):*
* Measurement taken with vehicle at unladen weight all 4 corners.
- Coil springs 483 ± 15 mm (19.0 ± 0.6 in)
- Air springs 473 ± 15 mm (18.6 ± 0.6 in)

IMO with SLS the best would be to have the same values all around

Click to expand...

stustrong said:

I did try downloading rave the other day. Didn't work out very well gave up after a while

Click to expand...

stustrong said:

Has anyone got the measurements for stock ride height.
7 seater
Rear air.
475mm front
485mm rear
Measured from hub to wheel arch lip. This sound correct ?

Click to expand...

berg450 said:

Mine is around 500mm at the front (new springs and dampers) and set to about 480mm at the rear (air springs).
Have you also checked the bump stop height (top of bump stop to axle bracket) which should be about 45mm at front and about 60mm at the rear.

Click to expand...

Floriin said:

Can you please tell me what springs you installed, I mean part code and if genuine or britpart?
I have tough times to find a replacement for my original white/purple, so any advice counts.

To answer to this thread:
- front with new Pink/Brown springs 510mm - too stif for my taste, looking to revert back
- rear air springs 475mm

Click to expand...