Sorry Exhaust Post Agin!

nickh75 · Jul 15, 2008

Me exhaust's fooked so ordered a new one (full system) for 173 quid.
it comes 2moro

an i gotta fit it for thursday, so is there owt i need other than exhaust assembly paste to do the job

,

never done a full system b4

thanx

Nick

thebiglad · Jul 16, 2008

nickh75 said:
Me exhaust's fooked so ordered a new one (full system) for 173 quid.
it comes 2moro

an i gotta fit it for thursday, so is there owt i need other than exhaust assembly paste to do the job ,

never done a full system b4

thanx

Nick

If it's for the Disco, bear in mind that the old one might be a one-piece, in which case you wil need to saw through the pipe after the middle box, to get it off.

Once all the old stuff is off, put the new middle box on first, then jack up the chassis to give working room before fitting the back box.
Cheers and good luck

Dave

leekegs · Jul 16, 2008

a big fook off hammer, some beer

leekegs

martinm · Jul 16, 2008

all straight forward really did mine last Saturday without any probs ... well the anglegrinder did the hard bit for me. check the screws they give you with the exhaust are long enough ;-) mine needed longer ones which I had around.

didnt need any paste of kind ... althought there is a copper gasket at the manifold if yer doing it from front to back

thats should be it really :-D have fun

PS: the ramps came in very handy which I got from mondo ;-) they have been put to good use not just for the landy

Tractionenginedriver · Jul 17, 2008

Just changed mine on 300 for a Defender non cat one, plus blanked of the egr, new filter, & now off to
cornwall to a rally with caravan to see how she goes!

karlo · Jul 17, 2008

Just 1 gasket, manifold to front pipe shouldn't need any assembly paste either.

nickh75 · Jul 17, 2008

thanx for ya replys lads but i cheated

mate down the road said he'd fit it for 30 quid

so why should i get me hands dirty an me arse wet

Sorry Exhaust Post Agin!

nickh75

Well-Known Member

thebiglad

Well-Known Member

leekegs

New Member

martinm

New Member

Tractionenginedriver

New Member

karlo

New Member

nickh75

Well-Known Member

Similar threads