No, it's above the plate where the top of the bag rests. A real bugger to get at!! If I can get under and take a photo I'll show where it's gone. Could be that elusive exhaust leak I've been chasing (sight misfire) which has melted it. No other heat source.... So, two fixes now
At least I found the cause I'm exhausted 
Might be usfull for the back boxI have a hoist @Doo, it's a 2 poster, if you get no joy from your m8 maybe I can help, I'm only 15 minutes from Sneckie. I've got my own bagosheizen on it at the mo with blocked PCV drain port in the sump but I'd gladly push it off for a few hours if it would help you out. PM me if you need to crack on.
I have plenty tools, tea n bics.
All I can see is a blatant euphemism, but I'll gladly help out with exhaustive surgery sans whatevever.
[That's what I figured. Maybe route it well away from hot exhausty bits an orl
Can I use 8mm fuel pipe (kinda copper and whatever)?? I could use it for the long runs and bendy parts, then quick release joints to attach the placcy bits.
Mr L322, thank you for the kind offer, but I also need new back boxes so I'll have to wait a day or two. Going to get big Ian to get them through his account with Euro or I'll end up paying triple price
Which direction you live anyhoo? up down or sideways?
Air line from fleebay. Lots of pritty colours..
STOP!
DON'T PANIC
Found the leak (now I need a pint.... Of whiskey
I have actual tears of pain and a bit of joy at finding it. It's not where you'd think, oh no! It's in behind the left rear wheel and it looks almost melted as if by a candle
Can't get hold of my mate, big Ian, to ask if I could borrow his ramp tomorrow so I'm going to be in k'in bits crawling under, but by George I'll feckin do it if it's the last thing I do
Chuffed to bits though as it's an easy fix. Some new pipe and a connection or two
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
