Taffy
Active Member
- Posts
- 470
- Location
- Wrexham North Wales
Looks fab !! Mr noisy. How easy was the access to bolts between the engine and fly housing holding the gearbox etc ?? I want to take my disco 200 out and put into my ex mod defender etc.
Some pics of my Disco :D
- Thread starter Mr Noisy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
It wasnt easy! It was easier when I was taking the gearbox out beciasr you can drop the rear of the box right down, whereas pulling the engine is tough because the rear of the gearbox hits the floor when you drop the engine so it's very tight!!!
However, with enough access created at the top (bear in mine the v8 is void in the middle but a diesel is not!) and a mate to help guide the socket on from above it can be done. Read in Haynes the recommended method cos itll give you an idea!
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Daily update, pile of painted parts:
- Posts
- 83,282
- Location
- Embasinga stocæ
Ah. the good old kitchen cabinet workbench 
.
tis looking good
.tis looking good
Last edited:
Taffy
Active Member
- Posts
- 470
- Location
- Wrexham North Wales
Yeah I don't wanna mt gearbox. I just want the engine and transfer etc. I dunno if it is easier to put the disco on car trailer and the undo all the body bolts fuel filler pipes and un do steering column bolts and then take it to scrap metal merchant and have them use forklift to remove the body away from the chassis etc and bring back the chassis. Easier to have access the the bolts and then I can sell the axles and chassis etc
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
If the body is truly ****ed then it is easier to get it out of the way. But as a disco owner I must ask you not to scrap a 200 body unless it is ruined because original unaltered bodies are becoming rare.
Either way mate it's doable!
Either way mate it's doable!
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Ah. the good old kitchen cabinet workbench
tis looking good
Aye, Tis a fine workbench that (when one swings too hard on the old vice) tends to come away from the wall.
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Daily update
drewster
Well-Known Member
- Posts
- 2,997
- Location
- new milton hampshire
when do you want to do my engine then nice
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
If I had more time I would do them more often I think, it's very enjoyable and rewarding work actually, so easy compared to horrible jobs lying underneath land rovers.
Never know, might get into it
Never know, might get into it
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
looks mint! very very sexual!
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Taffy
Active Member
- Posts
- 470
- Location
- Wrexham North Wales
Wow. Gleaming clean engine. I would be scared to turn the key in case of tiny oil spill !! Nive to see u using your radiator on wall to keep engine nice warm !!!
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
werent there once a thread on "wots your workbench"Ah. the good old kitchen cabinet workbench
nice job with the unjun' mr noisy
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Thanks mate
I need to get some posts in this thread to keep it going actually!!
Don't worry this is still the main thread!!
Better start with the vids:
Land Rover 3.5 V8 Discovery Rebuild Engine Overhaul First S - YouTube
Land Rover 3.5 V8 Discovery Rebuild Engine Overhaul First S - YouTube
Land Rover 3.5 V8 Discovery Engine Rebuild Overhaul Running - YouTube
And some pics:
More exciting stuff to follow
I need to get some posts in this thread to keep it going actually!!
Don't worry this is still the main thread!!
Better start with the vids:
Land Rover 3.5 V8 Discovery Rebuild Engine Overhaul First S - YouTube
Land Rover 3.5 V8 Discovery Rebuild Engine Overhaul First S - YouTube
Land Rover 3.5 V8 Discovery Engine Rebuild Overhaul Running - YouTube
And some pics:
More exciting stuff to follow
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
impressed with the quality of the vids you linked, and you seem almost professional in front of the camera!
nice sound, (not that i do v8's, more a diesel bloke) an only critisism would be, i think i'd be scratting round checking for leaks while running. (or get someone else checking for them)
generally tho', chuffin' well done!
nice sound, (not that i do v8's, more a diesel bloke) an only critisism would be, i think i'd be scratting round checking for leaks while running. (or get someone else checking for them)
generally tho', chuffin' well done!
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Yeah youre right, shoulda made provision for a leak checker, guess I hoped my dopey brother would have done it for me I guess!
discodrivercumbria
Well-Known Member
- Posts
- 3,317
- Location
- South lakes
Thanks mate
I need to get some posts in this thread to keep it going actually!!
Don't worry this is still the main thread!!
Better start with the vids:
Land Rover 3.5 V8 Discovery Rebuild Engine Overhaul First S - YouTube
Land Rover 3.5 V8 Discovery Rebuild Engine Overhaul First S - YouTube
Land Rover 3.5 V8 Discovery Engine Rebuild Overhaul Running - YouTube
And some pics:
More exciting stuff to follow
Sounds really good!! film star in the making!!! lol
Great job, keep it up!
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
Goodbye forever annoying bonnet cable!!!!
