Disco 2 Disco 2 V8 All doors but drivers locked but immobilizer working and car starting.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Being stuck superlocked you must be able to unlock the doors first with nanocom then you can disable the superlock but if the superlock motors don't respond to nanocom's body-security outputs nor to the trick with the wires then it's a brutal locksmith job to open the doors and replace all the actuators... get hold of nanocom and force the both superlock and lock motors to open in this menu
1740476688859.jpeg
 
Last edited:
sierrafery said:
Being stuck superlocked you must be able to unlock the doors first with nanocom then you can disable the superlock but if the superlock motors don't respond to nanocom's body-security outputs nor to the trick with the wires then it's a brutal locksmith job to open the doors and replace all the actuators... get hold of nanocom and force the both superlock and lock motors to openin on this menu
View attachment 335826
Click to expand...
I will give these two options a go. Hopefully, I can make it work with either, otherwise what a shame to have to get rid of a car for this design flaw. Much appreciate the help @sierrafery
 
so I have got the nanocom finally delivered, I did plug it and disarm the superlock and write the settings on the bcu, but it doesnt disengage the doors. i tried activating and deactivating the locks, unlock and superlock options in the settings and when unlocking ON, I can hear the mechanism working as it should, not only the electrical click it does when I press the unlock switch on the dash. Not sure why but that suggests that the locks work but still it does not open the doors. Any ideas @sierrafery
 
Chema Disco v8 said:
Not sure why but that suggests that the locks work but still it does not open the doors. Any ideas @sierrafery
Click to expand...
You should have use the unlock command before disabling things cos if it was locked with enabled superlock you should unlock it the same. Let superlock enabled when you unlock cos if you disabled it before trying to unlock it's possible that the superlock motor doesnt work then. If after that you hear activity from the latch and it doesnt open means the actuator is stuck.
 
Last edited:
sierrafery said:
You should have use the unlock command before disabling things cos if it was locked with enabled superlock you should unlock it the same. Let superlock enabled when you unlock cos if you disabled it before trying to unlock it's possible that the superlock motor doesnt work then. If after that you hear activity from the latch and it doesnt open means the actuator is stuck.
Click to expand...
I did that, and try all the rest of configurations I could. But seems that nothing works.
 
Im have rented the nanocom for a week only, i wont be able to replace the bcu this time i think. Im thinking to try drill, force open the doors somehow, and replace all the locks , deactivate the whole central locking inmobiliser etc etc, trying to figure how to go about it and if it will mess with anytjing else in the system.

I refuse to trash this car for this tbh
 
You must log in or register to reply here.

Similar threads

A
Sporadic Won't start and No Cranking
Replies
18
Views
513
Stanleysteamer
Stanleysteamer
R
Getting in my discovery td5
Replies
4
Views
207
Rockchik19
R
T
Central locking not working on all doors except drivers
Replies
6
Views
1K
Stanleysteamer
Stanleysteamer
M
Disco 2 Disco door lock issues
Replies
6
Views
719
Miss Charlie
M
M
Td5 immobilised after battery change
Replies
4
Views
757
Landmark2
Landmark2
Back
Top