Some pics of my Disco :D

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
uploadfromtaptalk1399534405142.jpguploadfromtaptalk1399534422134.jpguploadfromtaptalk1399534438995.jpg here's mine as it stands its a 300tdi
Ill look into the adrenalin store on eBay what type of arms should i be looking for weight wise ect
Also your front light guards where can i get a set?
 
noisy was on about the weight of the actual arm, the trailing arms arnt rated for car weight etc, they more depend on what lift youv got/going for
 
O right i see mine is lifted with a 2" spring combo
What sort of weight should the arms be weighing in at roughly do you know
 
Ok then we'll i looked on adrenaline 4x4 on eBay and the arms for the front with the rear arms are 350 plus delivery take it I'd just need to sort bushes for them then?
 
goes up the A pillar along the lip where roof line goes (behind trim), then out through a gromit to where you see it on rear panel.

Have you tried a pin in the nozel?

motor definitely working, ie blown fuse etc
 
Cheers Paul. Motors working but I'm not sure if it's maybe leaking somewhere along it's length. When it's a bit drier here I'll have a better look now I know where it runs.
 
most likely options are

blocked nozzle
buggered non return valve (next to motor in pipe, simply remove, bin, put pipe direct to pump)
blocked pipe

you can blow through pipe with compressed air to clear it out, they get pretty mucky after some time

do NOT NOT NOT lose the pipe inside the D pillar at the back of the car, that is a bugger to find again! :D
 
Mr Noisy said:
most likely options are

blocked nozzle
buggered non return valve (next to motor in pipe, simply remove, bin, put pipe direct to pump)
blocked pipe

you can blow through pipe with compressed air to clear it out, they get pretty mucky after some time

do NOT NOT NOT lose the pipe inside the D pillar at the back of the car, that is a bugger to find again! :D
Click to expand...

Heard its a real pain if you drop it in there. Never thought about non-return valve.

Cheers guys.
 
Have a look behind the filler bottle before you pull anything apart.

Mine had come apart at the union there.

If you look at the back of the bottle check for leaks after running the rear washer switch.
 
Just thought I better let y'all know I've been a bit busy being skint and also working on a side project, but I'm still alive!

Disco will return within a few months! :D

 
Hi lads.

Ahhh, im clawing my way back into this land rover thing!

Got myself together and have started dribbling coins into my disco money pot/pit again

just sold my front prop this morning, need to get the rear diff purchased and a pair of gwyn lewis props

then MOT it and go for a drive

and then build the air system!!

to be continued... see y'all in a few months :)
 
You must log in or register to reply here.

Similar threads

Irish4x4
Disco 2 Centre Exhaust Silencer
2
Replies
37
Views
4K
Stanleysteamer
Stanleysteamer
D
Disco 3 (LR3) LR3 Immobilized After Unique Situation
Replies
2
Views
666
DOCS
D
M
DEFENDER 90 PICKUP
Replies
12
Views
3K
dag019
dag019
1988smithy
Land Rover BUV's
Replies
11
Views
2K
1988smithy
1988smithy
A
L322 L322 '03; Completely new to Landy's, so a couple of questions
Replies
3
Views
998
roythebus
R
Back
Top