Series Winch Bumpers
- Thread starter Gurty
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
try Douglass Motors Ltd | Land Rovers, Range Rovers, Merlin Trailers, Services and Repairs
wimborne branch........either marcus or paul should be able to help you
wimborne branch........either marcus or paul should be able to help you
Antichrist
Member
- Posts
- 59
- Location
- Georgia, US & Alnwick sometimes
What kind of winch? A Warn 8274 fits perfect behind the stock bumper.
Or are you looking for a heavier duty bumper?
Or are you looking for a heavier duty bumper?
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,106
- Location
- Gloucestercotshirewolds
I guess because most folks mount em on top of the bumper like nature intended 
- Posts
- 7,332
- Location
- Under my landy
I guess because most folks mount em on top of the bumper like nature intended
:5biagree:
If needs be you can weld a plate on top of bumper + attach to chassis for extra space + strength
ed.poore
Active Member
- Posts
- 448
- Location
- Wild West Wales
Simple way to mount a winch:
Land Rovers
Land Rovers
ed.poore
Active Member
- Posts
- 448
- Location
- Wild West Wales
Cos us Series III owners are masochists and always try and build something rather than buy something and waste money...
StuntmanAd
New Member
- Posts
- 174
Yerp why buy when you can build and if you can't build you probably won't own a Series for very long
I got some 10mm thick steel plate and welded it between the chassis rails for the rear 2 bolts of the winch and mounted the front 2 through the original front bumper.
I got some 10mm thick steel plate and welded it between the chassis rails for the rear 2 bolts of the winch and mounted the front 2 through the original front bumper.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,106
- Location
- Gloucestercotshirewolds
Bolted angle iron between bumper bolts for the back winch bolts and reinforced bumper with angle under the fronts, kinda worried for a bit that the whole thing was hanging on the 4 dumb iron bolts but its pulled 2 1/2 tons vertical and 4 tons rolling and aint ripped the front off yet!
