- Posts
- 58,170
- Location
- Preston Lancs.
WD 40 in the blue can is not penetrating fluid. Will do a certain amount but nothing like as good as Plus gas.
Replacing shock absorbers (dampers)
- Thread starter Grrrrrr
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
WD 40 in the blue can is not penetrating fluid. Will do a certain amount but nothing like as good as Plus gas.
TVRConvert
Member
- Posts
- 81
- Location
- Sheffield
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
It does smell good tho :hysterically_laughi
odyssey
Active Member
- Posts
- 364
- Location
- Derbyshire
WD should only ever be used as aftershave.
Well - I believe one of the active ingredients is lanolin, so why not? It'll make your hair shiny too . . .
Datatek
Well-Known Member
- Posts
- 44,888
- Location
- Near Poitiers SW France
Hair? You have hair??Well - I believe one of the active ingredients is lanolin, so why not? It'll make your hair shiny too . . .
odyssey
Active Member
- Posts
- 364
- Location
- Derbyshire
Hair? You have hair??
Err yes, nearly as much as your avatar (which, I'm guessing is not actually you), not quite as white though, and not as thin on the top, not as long as it was in the 60s and 70's, but I still cut it every year whether it needs it or not.
Last edited:
Castor
Trainee maniac
- Posts
- 680
- Location
- Ebley, Glos.
odyssey
Active Member
- Posts
- 364
- Location
- Derbyshire
What??
:Cry::Cry::Cry:
Another illusion shattered......
I know - I had this mental image of a wise, Merlin-type sage, living a bucolic existence in rural France, dispensing pearls of wisdom from his vast fund of knowledge and experience . . .
What image do we replace it with???
A
TVRConvert
Member
- Posts
- 81
- Location
- Sheffield
I know - I had this mental image of a wise, Merlin-type sage, living a bucolic existence in rural France, dispensing pearls of wisdom from his vast fund of knowledge and experience . . .
What image do we replace it with???
A
odyssey
Active Member
- Posts
- 364
- Location
- Derbyshire
NOOOOOOOOOOO!
Oh ****! - sorry sorry sorry for prompting this.
(unless of course that actually IS Datatek)
Oh ****! - sorry sorry sorry for prompting this.
(unless of course that actually IS Datatek)
- Posts
- 1,824
- Location
- In the middle, somewhat elevated
MY EYES!!!! Oh God, my eyessssssssssssss:jaw::screaming_bug_eye_f:jaw:
Datatek
Well-Known Member
- Posts
- 44,888
- Location
- Near Poitiers SW France
That's an clever selfie
TVRConvert
Member
- Posts
- 81
- Location
- Sheffield
Castor
Trainee maniac
- Posts
- 680
- Location
- Ebley, Glos.
Dear TVRConvert,
Your address please to send the invoice for the PTSD counselling?
Thank you,
Castor
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Very good.
If I can bring this back on topic ...
This evening I changed the front shocks. However, I'm a little worried. RAVE states that the rubbers on the shocks should be arranged like so:
However, the rubbers and washers as supplied and on the car looked like this:
I put them on as per RAVE, although the shape the lower end goes in seems to mirror the way they came supplied.
Also, I was torqueing the nut up to 45Nm as per RAVE using my torque wrench but before it reached the required value the but just seemed to spin as if the threads were stripped. Same thing both sides. I had a spanner on the shock body so I'm sure that wasn't spinning.
Anyone know if RAVE is right in this instance? It seems very clear and seems to have gone out of its way to make it clear. The shocks I took off were Britpart so we're already in dodgy territory!
If I can bring this back on topic ...
This evening I changed the front shocks. However, I'm a little worried. RAVE states that the rubbers on the shocks should be arranged like so:
However, the rubbers and washers as supplied and on the car looked like this:
I put them on as per RAVE, although the shape the lower end goes in seems to mirror the way they came supplied.
Also, I was torqueing the nut up to 45Nm as per RAVE using my torque wrench but before it reached the required value the but just seemed to spin as if the threads were stripped. Same thing both sides. I had a spanner on the shock body so I'm sure that wasn't spinning.
Anyone know if RAVE is right in this instance? It seems very clear and seems to have gone out of its way to make it clear. The shocks I took off were Britpart so we're already in dodgy territory!
Castor
Trainee maniac
- Posts
- 680
- Location
- Ebley, Glos.
45Nm isn't a lot - presumably that's a Nyloc nut on there? It just needs to compress the rubbers a bit..
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
No, 45Nm isn't a lot! More worried about the rubber alignment. It is done as per RAVE but is it right?!
Littelwill
Well-Known Member
- Posts
- 3,065
- Location
- Lincolnshire
RAVE isnt always right... Id be worried too tho so good idea to check.
- Posts
- 16,479
Any help.....
