Removing Wheel Stud..

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
C

ccoaton

New Member
Posts
51
Location
Northern Ireland
Ok I had to replace a few wheel studs today....Was Flicking through Haynes Manual,.And it look like you have to remove the Hub to get these out...

I removed the Caliper,.Then Disc,.And made a small groove in side of the Hub (shown in Pic),.Just a few MM..Then rotate wheel to each stud is at groove and they pop out easy...You could probably do it a lot tidier than i have...:)

StudChange.jpg
 
ccoaton said:
Ok I had to replace a few wheel studs today....Was Flicking through Haynes Manual,.And it look like you have to remove the Hub to get these out...

I removed the Caliper,.Then Disc,.And made a small groove in side of the Hub (shown in Pic),.Just a few MM..Then rotate wheel to each stud is at groove and they pop out easy...You could probably do it a lot tidier than i have...:)

StudChange.jpg
Click to expand...

well done,a great idea.;)
 
got a broken wheel stud in the rear of my freelander but cant se pic is it still on here on just me who cant see it ?
 
You must log in or register to reply here.

Similar threads

MacStu
Wolf style rim retrofit to 1983 110
2 3
Replies
50
Views
1K
miktdish
miktdish
chemmie
Rear wheel hub adventures
Replies
12
Views
1K
chemmie
chemmie
MAF Diver
Disco 2 Something wrong? 2x the bump stop height measurements in a stock Discovery 2
Replies
3
Views
866
MAF Diver
MAF Diver
W
wheel bearing
Replies
18
Views
1K
weyert
W
J
Stripped Wheel Stud L322
2
Replies
27
Views
2K
marjon
marjon
Back
Top