Broken l322
New Member
- Posts
- 3
- Location
- France
Range Rover l322 gearbox broken?
Hello ,I have finally joined this forum as I have just bought an l322 it is a td6 from 2003 with a 5 speed Gm box.I am 16 years old and this is my « dream car »however it has a broken gearbox.I am going to attempt to fix it as I’ve already got some experience changing RRC gearboxes but I could do with some advice.
The problem is about a minute after start up when all the oils warm it loses all drive and reverse,it will no longer move at all in till it cools down again.
There are no error messages or lights on dash and the transfer box seems alright switching between high and low.
It is also worth mentioning the cars done almost 300000km and I’ve got no service history.so I started by draining transfer box oil which was clean ish with no metal in it but the gearbox however had some grey sludge and metal shavings in the oil pan.On idle there is a rattle/grinding noise coming from gearbox area.
I have got a quote to rebuild the gearbox for 2 grand but I’m unsure if this would fix the problem,Could it be torque converter,transfer box or electrical issue? I don’t know,so any knowledge would be helpful.Thanks
Hello ,I have finally joined this forum as I have just bought an l322 it is a td6 from 2003 with a 5 speed Gm box.I am 16 years old and this is my « dream car »however it has a broken gearbox.I am going to attempt to fix it as I’ve already got some experience changing RRC gearboxes but I could do with some advice.
The problem is about a minute after start up when all the oils warm it loses all drive and reverse,it will no longer move at all in till it cools down again.
There are no error messages or lights on dash and the transfer box seems alright switching between high and low.
It is also worth mentioning the cars done almost 300000km and I’ve got no service history.so I started by draining transfer box oil which was clean ish with no metal in it but the gearbox however had some grey sludge and metal shavings in the oil pan.On idle there is a rattle/grinding noise coming from gearbox area.
I have got a quote to rebuild the gearbox for 2 grand but I’m unsure if this would fix the problem,Could it be torque converter,transfer box or electrical issue? I don’t know,so any knowledge would be helpful.Thanks