Range Rover Classic LSE EAS

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
EAS sorted!!
I had the chance to buy an EAS ECU for £100. So I bit the bullet and ordered it, as I'd checked everything on the wiring/connection side. Just had no feed to compressor relay from Pin 8 on ECU and that should be 12V as soon as ECU recognises 500 RPM from alternator. Fitted replacement ECU and worked straightaway. It's a slightly different P/N and off an earlier car, but seems to be working fine. Happy days. Thanks for all help and info.
 
Mercedeschris said:
EAS sorted!!
I had the chance to buy an EAS ECU for £100. So I bit the bullet and ordered it, as I'd checked everything on the wiring/connection side. Just had no feed to compressor relay from Pin 8 on ECU and that should be 12V as soon as ECU recognises 500 RPM from alternator. Fitted replacement ECU and worked straightaway. It's a slightly different P/N and off an earlier car, but seems to be working fine. Happy days. Thanks for all help and info.
Click to expand...
Well done and thanks for the update it may help others.;):D
 
Mercedeschris said:
EAS sorted!!
I had the chance to buy an EAS ECU for £100. So I bit the bullet and ordered it, as I'd checked everything on the wiring/connection side. Just had no feed to compressor relay from Pin 8 on ECU and that should be 12V as soon as ECU recognises 500 RPM from alternator. Fitted replacement ECU and worked straightaway. It's a slightly different P/N and off an earlier car, but seems to be working fine. Happy days. Thanks for all help and info.
Click to expand...
It would be interesting to open the ECU up and see what has failed.
 
Funny you should say that Datatek. I am going to drill out the 10 pop rivets that hold the board in the casing to see if I can see anything obviously blown/burned. I'll let you know.
 
On the same car but a different subject......
My rear wiper won't run constantly when switch is pressed in. It works if I hold switch in manually. My question is....is the rear wiper switch a "latching switch" or "non latching" ? If its latching then my switch is faulty? But they as rare as hens teeth, can't see one new or used any where. So if someone can let me know what type of switch it is ? If its non latching then I have a problem somewhere else on the circuit ? I'm also wondering if the switch is used on any other vehicle ie Freelander ??
 
Mercedeschris said:
On the same car but a different subject......
My rear wiper won't run constantly when switch is pressed in. It works if I hold switch in manually. My question is....is the rear wiper switch a "latching switch" or "non latching" ? If its latching then my switch is faulty? But they as rare as hens teeth, can't see one new or used any where. So if someone can let me know what type of switch it is ? If its non latching then I have a problem somewhere else on the circuit ? I'm also wondering if the switch is used on any other vehicle ie Freelander ??
Click to expand...
What vehicle do you have?
 
You must log in or register to reply here.

Similar threads

K
Is my RR Classic in EAS shutdown?
Replies
12
Views
969
kevleaper
K
R
Classic Classic EAS Diagnostics Help Near Nottingham
2
Replies
20
Views
2K
RAW111111
R
ryeguy32118
Classic 1995 Range Rover County Classic 3.9 V8 - Idles but stalls out when in Drive or Reverse
Replies
6
Views
3K
Rangieman123
Rangieman123
N
Confusing EAS faults
Replies
11
Views
862
Datatek
Datatek
BRADN061
Range Rover Classic LSE 93 Restoration Project
Replies
5
Views
1K
Hippo
Hippo
Back
Top