Radiator not sitting square

R

Ryan_mag

Member

Posts

26

Location

Northern Ireland

• Sep 3, 2019

• #1

Defender 200tdi radiator giving me a bit of a headache can't get it to sit square. Dosent bother me except it means my fan catches the fan cowl.
What way is the top of the radiator held in place there dosent seem to be any adjustment in the brackets

Thanks in advance

 

Attachments

• 
  IMG_20190902_163611.jpg

  255.2 KB · Views: 73

Turboman

Mab An Gov

Posts

60,151

Location

Lathrowda, Kernow

• Sep 3, 2019

• #2

Ryan_mag said:

Defender 200tdi radiator giving me a bit of a headache can't get it to sit square. Dosent bother me except it means my fan catches the fan cowl.
What way is the top of the radiator held in place there dosent seem to be any adjustment in the brackets

Thanks in advance

Click to expand...

2 brackets at the top, the bits that attach to the rad have rubber mounts.
The brackets adjust by moving the bracket where it attaches to the panels at the sides.

 

R

Ryan_mag

Member

Posts

26

Location

Northern Ireland

• Sep 3, 2019

• #3

I can't see any adjustment in them the bolts seem to be fixed

 

C

Colthebrummie

Well-Known Member

Posts

9,870

Location

Thatcham

• Sep 3, 2019

• #4

Loosen off all the fittings and see if you can wiggle it straight. Most landrovers aren't built completely straight to begin with. Brummie car makers are given hammers but not set squares cos they are for poofs.

Col

 

Turboman

Mab An Gov

Posts

60,151

Location

Lathrowda, Kernow

• Sep 3, 2019

• #5

Ryan_mag said:

I can't see any adjustment in them the bolts seem to be fixed

Click to expand...

There should be slight movement in the bracket with all the fittings loosened, if there isn't, create some using a rat tailed file in the holes in the panel.

Or, like he says^^^^^, just use brute force.

 

H

Hicap phill

Well-Known Member

Posts

16,243

Location

Wiltshire

• Sep 3, 2019

• #6

If that’s a standard fit engine, check engine mounts as well.
That’s if the marks of the fan are on the lower cowl.

 

C

Colthebrummie

Well-Known Member

Posts

9,870

Location

Thatcham

• Sep 3, 2019

• #7

As a next to last resort, file a bit off the tips of the fan blades.

Col

 

Turboman

Mab An Gov

Posts

60,151

Location

Lathrowda, Kernow

• Sep 3, 2019

• #8

Colthebrummie said:

As a next to last resort, file a bit off the tips of the fan blades.

Col

Click to expand...

They will probably file a bit off themselves in use, or off the inside of the cowl, whichever is softer!

 

H

Hicap phill

Well-Known Member

Posts

16,243

Location

Wiltshire

• Sep 3, 2019

• #9

Colthebrummie said:

As a next to last resort, file a bit off the tips of the fan blades.

Col

Click to expand...

Still learning from you...
Would you hold the sand paper while the engine is running?

 

C

Colthebrummie

Well-Known Member

Posts

9,870

Location

Thatcham

• Sep 3, 2019

• #10

Hicap phill said:

Still learning from you...
Would you hold the sand paper while the engine is running?

Click to expand...

Not me personally, but I have a rather stupid brother.

Col

 

zeaphod

Well-Known Member

Posts

3,107

Location

Belfast, Norn Iron

• Sep 3, 2019

• #11

The radiator frame is located onto two lugs on the chassis at the bottom, worth checking these are still intact/in the right place - and that the little rubber bushes are still intact.