Project lizzie rebuild thread

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dr_evil said:
Yeah 6mm folded and welded tray from one piece rather than two, make the mounts up so they go over both sides of the chassis leg using the 6mm with some fillets and that should do nicely :D

My series bumper is all 5mm but thats plenty for it :)
Click to expand...

Eggsackly what i was thinking! :D

And maybe make the mount for the outer side of the chassis leg come back further along the chassis to utilise other bolts holes maybe :scratching_chin:

Just thought about something else! Wanna put high lift jacking points on it to. Anyone know how big the holes have gotta be?
 
I think I made them 30mm last time I did some or may have been larger than that

only really need to use the front two but you could use the others then make up a steering/sump guard to go with it
 
Dr_evil said:
I had to google it but it means strong according to urban dictionary :confused:
Click to expand...

OOOOOOhhhh..... I See..... Well in that case I'm sure your bumper will look pretty sick... *smug smile raised eyebrows*



Cheers man :doh:... SORRY... Bruv.. *raised eyebrow* or Blud... not entirely sure...


Why do we have to find new words?? Theres some pretty cool ones which have been forgotten...

Kexy: brittle, dry.
Crassulent: Fat.
Dodrantal: of nine inches in length..... Laaadies :D

Sorry i'll stop high-jacking your thread now just had to ask..... :eek:
 
700Quid said:
OOOOOOhhhh..... I See..... Well in that case I'm sure your bumper will look pretty sick... *smug smile raised eyebrows*



Cheers man :doh:... SORRY... Bruv.. *raised eyebrow* or Blud... not entirely sure...


Why do we have to find new words?? Theres some pretty cool ones which have been forgotten...

Kexy: brittle, dry.
Crassulent: Fat.
Dodrantal: of nine inches in length..... Laaadies :D

Sorry i'll stop high-jacking your thread now just had to ask..... :eek:
Click to expand...

No worries mate ;)

Hopefully the steel should turn up next week so i can get on with it:D
 
700Quid said:
Are you using the extension piece on the jack?

I only ask cause if you are putting shackle points on your bumper you could just use the strap attachment or something like
https://www.expeditionexchange.com/recoverygear/DSC01387.jpg ???
Click to expand...

Yea thats the plan. Have always planned on the jacking points. Will be the same with the rear bumper. Will make up 2 more "hench" recovery points and also put 2 jacking points in aswell. And maybe a nato hitch in the middle:eek:

Hi-Lift Jack Adaptor

Looks a bit sturdier than your linky tbh:eek:

Not worried aboit doing more fabrication work to the bumper makes it more of a challenge :)
 
robbh said:
Yea thats the plan. Have always planned on the jacking points. Will be the same with the rear bumper. Will make up 2 more "hench" recovery points and also put 2 jacking points in aswell. And maybe a nato hitch in the middle:eek:

Hi-Lift Jack Adaptor

Looks a bit sturdier than your linky tbh:eek:

Not worried aboit doing more fabrication work to the bumper makes it more of a challenge :)
Click to expand...


Yeah it was just an idea........ :Cry: .... :) in fairness I just ripped the photo off google :D I have been vaguely thinking about this, its a long way off for me yet. Just wondering are you just making holes in the bumper or are you intending to sleeve them? I've not seen any of these in the flesh so to speak...
 
700Quid said:
Yeah it was just an idea........ :Cry: .... :) in fairness I just ripped the photo off google :D I have been vaguely thinking about this, its a long way off for me yet. Just wondering are you just making holes in the bumper or are you intending to sleeve them? I've not seen any of these in the flesh so to speak...
Click to expand...

Ive been vaguely thinking about it for a while also :D ive never seen one in the flesh either im just going by pictures i find on the net then taking measurements from the chassis/original bumper :p

Im intending on sleeving them and welding the sleeve into the box like ive done with the recovery point. :cool:
 
Hi again all sorry for the lack of updates been really busy sorting out other things of late.
But had a crack a carrying on with the build over the weekend and by god its hot welding in this weather!

So got on with sorting out the front end at long last :D

Heres how it looked on friday morning before i started:

20130629_125443.jpg


And now the rest of the piccies in no particular order :p

20130712_142057.jpg


20130712_142110.jpg


20130715_114827.jpg


20130715_121210.jpg


And heres how it ended up :D


20130712_182802.jpg



Dont worry the standard bumper is not staying on i just haven't had the time to build the winch bumper yet :eek:

Just need to finish off putting some strengthening bar and fabricate new inner wing tops rails and then just got to fab up a couple of brackets for stuff that used to be held on by the inner wings. So still a bit of work to do yet :)

Hopefully should be more than enough clearance for 37's now :) although may need to revisit the rear inner arches now.

Also got my bottom end bearings shells ordered this morning for the v8 so hopefully should see the bottom end going back together soon too.
 
You must log in or register to reply here.

Similar threads

G
Discovery 2 TD5 Donor Conversion
Replies
17
Views
454
GTRekky
G
heggars
Disco 1 Axle Advise, 300TDI
Replies
5
Views
920
heggars
heggars
S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
2K
sv_dOnut
S
R
Seat Advice
Replies
0
Views
541
Ronnie Pug
R
Skihorn
Door Sill Trim Clips
Replies
8
Views
709
Skihorn
Skihorn
Back
Top