LandyMad123
New Member
- Posts
- 37
- Location
- Newbury
its gunna look smart once finished,very nice job
Project 1989 90 (Bruce)
- Thread starter Defender-Sam
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Defender-Sam
New Member
- Posts
- 358
- Location
- Burton Upon Trent
Can you tell what it is yet?
well it has got a Tdi in.
painted wheel carrier fitted,
my attempt to make it look as original as possible.
reffited filler neck/cap
weather has been crap, 6 inches of snow meant that i couldn't get the roof painted so thats hopefully tomorrows job (landys going under a tarp on the drive) more progress then.
Sam
Jason2
Well-Known Member
- Posts
- 2,001
- Location
- Poitou Charentes-France
Well done matey 
Nearly there now
Nearly there now
Defender-Sam
New Member
- Posts
- 358
- Location
- Burton Upon Trent
Well done matey
thanks chaps its getting there now. its cellulose paint that I'm using.
weather has been against me again today, started off with a trip to get a front numberplate made up and a tarpaulin to stop it filling with snow the numberplate was successful but the tarp was too small and with the heavy wind meant that idea was abandoned.
anyway enough moaning got the roof, bonnet and back door painted and some more bits done outside, fitted some reflectors on the rear, had an incident with a door blowing open and chipping the paint on the bulkhead so fitted the door stays, some matting in the footwells and the pedal lock.
plate,
reflectors,
matting,
chipped bulkhead (look closely)
pedal lock
the plan is to try and get it to an mot on saturday, just relying on having a screen fitted during the week and a few bits still needs seat belts, vent seals, seats, some sealant on the exhaust joints, wipers, roughly set tracking and headlight aim. oh and exited the garage a tad to quickly and nearly ripped the windscreen frame off on the door handle ooops
Sam :tea:garygledhill
Member
- Posts
- 98
- Location
- halifax illingworth
top work fella wish i had time and money to do that to mine ho and a garage
Defender-Sam
New Member
- Posts
- 358
- Location
- Burton Upon Trent
top work fella wish i had time and money to do that to mine ho and a garage
thanks yes I'm pretty lucky with the garage, going to be spoilt and wish it was taller...
thanks yes I'm pretty lucky with the garage, going to be spoilt and wish it was taller...
could do with borrowing it to spray mine in
Qb90
Member
- Posts
- 44
- Location
- Southend-on-sea essex
Looks tidy mate nice work
mark-d
Well-Known Member
- Posts
- 1,107
- Location
- Netherlands
that's quite a transformation.... good job
Boris113
Well-Known Member
- Posts
- 1,356
Keep up the good work Sam!
Glad to hear the doors were ok (once you had removed the paint!) Regarding the door stays, that type doesn't have any way of holding itself open annoyingly. A job on my to-do list is to modify a set from 1 piece doors and see if that would work.
I noticed you've used an airfilter housing from a 300tdi disco, do you have any pictures of how you have mounted it?
Harry
Glad to hear the doors were ok (once you had removed the paint!) Regarding the door stays, that type doesn't have any way of holding itself open annoyingly. A job on my to-do list is to modify a set from 1 piece doors and see if that would work.
I noticed you've used an airfilter housing from a 300tdi disco, do you have any pictures of how you have mounted it?
Harry
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
looking well smart mate
Defender-Sam
New Member
- Posts
- 358
- Location
- Burton Upon Trent
thanks guys not long now,
cheers Harry yes I'm pretty happy with the doors worth the sunday drive out, ill look into the door stays at a later date. the air box is mounted on a rubber cotton reel type exhaust mount from the side of the air box to the outer to inner wing bracket, going to see how it is in that position its a tight squeeze.
got the seat belts and seats mounted this evening
got a quote for autoglass to supply and fit the windscreen and after a moments silence ( £383 excluding VAT) they were swiftly told ill go elsewhere, hopefully someone local is going to sort it on thursday.
the whole things covered in dust gonna be a hell of a job to clean everything.
Sam
Defender-Sam
New Member
- Posts
- 358
- Location
- Burton Upon Trent
yeah the local glass guy quoted me £73 +vat so not bad really, auto glass give FREE wiper blades tho. some how not worth that extra cost tho
danny dorito
Active Member
- Posts
- 102
nice sir! very nice! How is the pedal lock? looked at them the other day, how secure would you say it was?
Defender-Sam
New Member
- Posts
- 358
- Location
- Burton Upon Trent
right then got the new screen fitted on thursday, spent yesterday flat out reassembling everything hit some issues like once the roof and sides were all bolted and tightened my Custom rear door didn't fit so had to bang the old one on for the MOT, and the internal bonnet release wouldn't work so had to cut a slat out of the grille to operate the release that way.
anyway to cut a long story short he flew though the mot this morning just waiting for some docs to come though then i can get some tax. now the small things to sort i.e. door trims, the back door, seal some of the "poor" fitting panels, add some sound, cb, some sound deadening, line the hardtop panels and roof.
pretty happy at the minute spent the rest of today sorting out the aftermath of yesterdays activities. the entire contents of my tool chest scattered over the garage.
Sam :tea:
anyway to cut a long story short he flew though the mot this morning
just waiting for some docs to come though then i can get some tax. now the small things to sort i.e. door trims, the back door, seal some of the "poor" fitting panels, add some sound, cb, some sound deadening, line the hardtop panels and roof.pretty happy at the minute
spent the rest of today sorting out the aftermath of yesterdays activities. the entire contents of my tool chest scattered over the garage.Sam :tea:
