P38 v8 Petrol Overheating

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
liners can slip after an overheat or they can slip after a crack appears in the block. i don't know if a slipped liner can cause a crack.
you can have a crack without the liner slipping, but a liner slipping without a crack won't enable the passage of exhaust gasses to the coolant

is it time to do another sniff test? ask your friendly MOT guy if he'll wave his analyser over your coolant tank
 
A slipped liner will usually give you a constant tap tap tap at engine speed. Liners usually slip when the block cracks through a water passage behind a liner, allowing coolant to come in contact with the liner, lubricating it and allowing it to slip. Following that, you end up with coolant creeping up the liner and getting into the combustion chamber.

Have you checked your spark plugs to see if any are steam cleaned?
 
That’s what I thought. But reading up it is an important part of the cooling system. Hot water is always going through the matrix. It’s only the flaps left and right that stop hot air coming into the car and regulated. The water to the matrix is not regulated at all and is constant
 
madbrit said:
That’s what I thought. But reading up it is an important part of the cooling system. Hot water is always going through the matrix. It’s only the flaps left and right that stop hot air coming into the car and regulated. The water to the matrix is not regulated at all and is constant
Click to expand...
Yep that's true, but it's not dumping heat anywhere when the blend flaps are closed, so it's not aiding in the engine cooling. Equally it's not causing a restriction and heat buildup if it were blocked. At least that's my view
 
I have now bypass the matrix and off for another trip soon, see what happens, just trying everything before I start stripping the engine, like getting my other P38, 1998 2,5 DSE MOT's that's Thursday, so a days just checking it through tomorrow
 
Thanks, that is a job for tomorrow, along with compression test and pressure test each cylinder to see if any leaks back to cooling system
 
You must log in or register to reply here.

Similar threads

P
Sport Coolant not circulating
Replies
11
Views
821
pllaw
P
W
P38 oveheating
2 3 4
Replies
79
Views
6K
Montyjohn
Montyjohn
enjoi
P38A Going through radiators- not overheating
2 3 4
Replies
60
Views
4K
enjoi
enjoi
S
3.9EFi in Lotus is overheating very quickly
Replies
6
Views
751
springwood
S
DanClarke
P38A Part # of petrol filler neck for 4.6 Petrol MY2000
Replies
7
Views
522
Grrrrrr
Grrrrrr
Back
Top