- Posts
- 4,653
- Location
- Rotherham
You are talking me 15yrs ago not nowNot a huge job 12 mm society and combination and a flat screwdriver.
P38 dse overheating
- Thread starter Bigsi234
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
It’s a u pipe. Could be the rubber pipe but sometimes the metal bit on engine rots out. @tarphenry did the one on his old engine, god knows how he found a replacement he must have made it
If you get the manifold off check the sensors aren’t leaking but doubt they’d let that much out. You should have plastic manifold so can probably get away without needing new manifold gaskets if it’s not been off too many times
If you get the manifold off check the sensors aren’t leaking but doubt they’d let that much out. You should have plastic manifold so can probably get away without needing new manifold gaskets if it’s not been off too many times
brianp38dse
Well-Known Member
- Posts
- 20,067
- Location
- heathrow
Who said the tubes were hard to find
know i had seen them some where
https://www.turnerengineering.co.uk/664613-4-water-tubes-cylinder-head-c2x27117432
know i had seen them some where
https://www.turnerengineering.co.uk/664613-4-water-tubes-cylinder-head-c2x27117432
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Hard to find unless you are Brian
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Don't think so. Not on a '97 model, not unless someone has been fettling.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Post "98
brianp38dse
Well-Known Member
- Posts
- 20,067
- Location
- heathrow
Hard to find unless you are Brian
I just remember another member needing one and finding turners did them and made a mental note i thee old grey matter
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Cylinder head return hose is - PCH000030. Widely available at £1.60!?
OE Is £30
OE Is £30
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
That's a result. The metal part is a bit of a pig to replace.
You seem to have a few parts missing?
brianp38dse
Well-Known Member
- Posts
- 20,067
- Location
- heathrow
So the overheat was an easy fix but the aircon will take a bit more thats p38`s for you they give with one hand and take with the other
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
So the overheat was an easy fix but the aircon will take a bit more thats p38`s for you they give with one hand and take with the other
To be fair it looks as though the PO took the lot.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
On the upside you know it will be as good as new when you've fixed it.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
More update on over heating issue , been towing for a good 40 mins no overheating issues which is excellent news , but I've got a bloody gearbox fault now .
ABS light comes on briefly , gearbox kicks down and gearbox fault comes up it cut out once but managed to get it home but getting concerned gotta tow caravan in 2 weeks time for holiday
ABS light comes on briefly , gearbox kicks down and gearbox fault comes up it cut out once but managed to get it home but getting concerned gotta tow caravan in 2 weeks time for holiday
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Marshall8hp
Well-Known Member
- Posts
- 297
- Location
- Sydney
How is your battery? Poor battery condition will trigger the transmission error.
