P38 boot won't open
- Thread starter Landyrote
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
If the button has failed you can remove the liner from inside to get at the locking unit and button. Fuse 15 supplies tailgate actuator.
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
Might be the contacts on the motor drive to the catch. it was on mine. search my posts for explanation
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
I take it the fuse had blown, did you find out why? Worth stripping, cleaning and lubing the switch with Vasaline.
Martian
Active Member
- Posts
- 173
- Location
- Lincolnshire
It's dead easy to get to - mine started playing up whilst I was replacing my upper tailgate.
Three 'captive' slot head screws - turn 90 degrees and the carpeted liner simply pulls out, (the far end simply slots into a recess).
The button is hel by two Philips screws and you then twist the switch 90 degrees and it pills out of its recess.
Unplug it's connector and there you have it.
The switch, itself, can be stripped further by pressing a small lever, (at the base of the switch - near to the contacts), and twisting the locking ring and the switch will drop out from the button assembly.
I simply sanded the button base, (it was catching), and I now have a fully functional smooth tailgate button!
Three 'captive' slot head screws - turn 90 degrees and the carpeted liner simply pulls out, (the far end simply slots into a recess).
The button is hel by two Philips screws and you then twist the switch 90 degrees and it pills out of its recess.
Unplug it's connector and there you have it.
The switch, itself, can be stripped further by pressing a small lever, (at the base of the switch - near to the contacts), and twisting the locking ring and the switch will drop out from the button assembly.
I simply sanded the button base, (it was catching), and I now have a fully functional smooth tailgate button!
- Posts
- 58,170
- Location
- Preston Lancs.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
I never keep it long enough for it to dry outOr if no Vaseline KY jelly. Though it does dry up over time.
