boycie
Active Member
- Posts
- 538
- Location
- Silver end Braintree ESSEX
Hi Folks I need your help a couple of days ago I got a message on the dash,alarm fault so when we got home I got the nano com out and switched the alarm off no more message anyway today I had a couple of hours to spare so out came the Nanocom and I switched the alarm back on to try and see what the problem
could be well to cut a long story short the car won't start I am getting fault code P1668 serial link fault drive cycle A occurred 7times signal is to high .l have switched the alarm off and the immobiliser is disarmed I have entered the EKA code in via the nanocom and it reads instructing the becm to disarm but still the car won't start . I have done a search on here but can't see an answer ,help I am getting some stick for messing with the car .
could be well to cut a long story short the car won't start I am getting fault code P1668 serial link fault drive cycle A occurred 7times signal is to high .l have switched the alarm off and the immobiliser is disarmed I have entered the EKA code in via the nanocom and it reads instructing the becm to disarm but still the car won't start . I have done a search on here but can't see an answer ,help I am getting some stick for messing with the car .