Nano com won't connect to SRS to clear fault

Offroverp38a

New Member

Posts

5

Location

Essex

• May 18, 2021

• #1

Hello i have just got myself a nanocom and I'm having a problem connecting to the Airbag ecu but all other ecu's connect ...
Has anyone had this problem and solved the issue ? Or any idea's what the problem could be ?
Thanks.
1998 dhse

 

Mark Piercy

Well fumbled member....

Full Member

Posts

12,596

Location

Sud ouest France !

• May 18, 2021

• #2

Is your ignition on? Most diagnostic tests can be done with the ignition off but maybe put the ignition on.
Is there a problem with the srs system?
Checked fuses?

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

Full Member

Posts

19,280

Location

Buckinghamshire, UK. ('95 DT)

• May 18, 2021

• #3

Offroverp38a said:

Hello i have just got myself a nanocom and I'm having a problem connecting to the Airbag ecu but all other ecu's connect ...
Has anyone had this problem and solved the issue ? Or any idea's what the problem could be ?
Thanks.
1998 dhse

Click to expand...

Does it have the connector under the seat? That tends to act up if it does.

 

Soir

Member

Posts

12

Location

British Columbia, Canada

• Apr 28, 2022

• #4

Offroverp38a said:

Hello i have just got myself a nanocom and I'm having a problem connecting to the Airbag ecu but all other ecu's connect ...
Has anyone had this problem and solved the issue ? Or any idea's what the problem could be ?
Thanks.
1998 dhse

Click to expand...

Did you ever find a solution to this? I have the same problem I am trying to solve. I have my SRS light on and Airbag Fault but my Nanocom will not connect to the Airbag ECU to detect or clear faults? It talks to the other ECUs just fine.

 

Mark Piercy

Well fumbled member....

Full Member

Posts

12,596

Location

Sud ouest France !

• Apr 29, 2022

• #5

Is the ignition on while your connected?

 

Datatek

Well-Known Member

Posts

44,806

Location

Near Poitiers SW France

• Apr 29, 2022

• #6

Soir said:

Did you ever find a solution to this? I have the same problem I am trying to solve. I have my SRS light on and Airbag Fault but my Nanocom will not connect to the Airbag ECU to detect or clear faults? It talks to the other ECUs just fine.

Click to expand...

Could be a problem with the OBD connector.

 

JUKE179r

Well-Known Member

Posts

3,166

Location

Suffolkshire

• Apr 29, 2022

• #7

@Soir ... When was the last time you updated the Nanocom firmware?

 

kermit_rr

Very

Full Member

Posts

33,327

Location

North Shropshire

• Apr 29, 2022

• #8

You can't clear an active fault, you need to double check you've resolved the issue 100%
What is the fault you've got and is it the early or later version SRS?