bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
only 1 can of stella mate?
Aye ah'm afraid so mate.... but ye should see the pile under the other bus and any available space around the garage
only 1 can of stella mate?
Aye ah'm afraid so mate.... but ye should see the pile under the other bus and any available space around the garage
are those springs fooked mate?
Can't say fur sure mate but they're not cracked or owt (apart from the ****ty paint)... why d'ye ask? D'ye want them??
could do with some for the front of the 90 (think the 1's i have are probably the originals from new 87 reg)
i replaced the rear pair few years ago with + 2" hd ones so she's a tad nose low
dont know if the rear 1's you have would redress the balance or not.
my driving style tends to bottom them out now and then
From what ah've heard, the front ones are the same as 90 rears so dunno if they're the same as yer 90's front??? But if they are, ye're more than welcome tae have them mate
sounds good mate need a courrier now i spose dont need the shocks though bud got OME all around
Guid job ye don't want the shocks mate as ah cut the top of off one!
i had a set of monroe before and and when i replaced the rear axle sheared the bottom nut off FFS thats why i went to OME
is that a flat coat retriever puppy in ya truck
spoke to guy at mm4x4 he says it's unusual to have dodgy britpart spring,
they are 13mm different in height but when you look at the front it looks worse. sent him pics he asked for awaiting reply. tried taking measurements from chassis to various points but none seemed to be the same. is the front ****ed or is it me.
in the pic 90 is empty, got 1/2 tank diesel but that should not make any difference should it, the tank is in the centre at the back
Silly question.... were the springs fitted the right way round?
fronts were put on front and rears on the rear. There was nothing to indicate a left or right side spring. am i missing something here?the 90 is a td5
not that i was aware of i put them next to each other and they looked exactly the same, and they were all just plain yellow, when i bought them i queried about the backs as they were only slightly taller than the originals , apparently they are stiffer and do not compress as much
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!