Living with a Cheapo defender,

Thor1950 · Jun 30, 2013

redhand said:
No they were listed as remanufactured Lockheed calipers for a 110. and listed as been suitable for mine. Thy're not and they'll be going back and a paypal complaint lodged.

Please show me a post where I've laughed at other people buying expensive calipers..

referring to you buying a cheap priced 110 and other spending several k more than you did. You have had your share of problems with it though

Pikey · Jun 30, 2013

Grit Valve said:
Not teaching you to suck eggs but you realise there are two types early late I wonder if that's the problem its been know for people to change the whole front axel including brakes .

these are rear calipers. I did the fronts a while back..

Grit Valve · Jun 30, 2013

jamesmartin said:
there is only one diameter of disc though ,for rrc disco and defender

Ah ok what's diffrance between early late just solid vented?
Obviously the wrong listing .

Pikey · Jun 30, 2013

Thor1950 said:
referring to you buying a cheap priced 110 and other spending several k more than you did. You have had your share of problems with it though

but I knew when I bought it that it was gonna need ****loads of money throwing at it. The whole idea was that I'd have the satisfaction of knowing that everything was new and working. Instead of spending £5k on a similar aged motor and wondering what was gonna break next.

Grit Valve · Jun 30, 2013

redhand said:
these are rear calipers. I did the fronts a while back..

Wrong link red

Pikey · Jun 30, 2013

Grit Valve said:
Wrong link red

Google inserts the links automatically, tis a form of advertising.. Nowt to do with me.:mad2:

jamesmartin · Jun 30, 2013

Grit Valve said:
Ah ok what's diffrance between early late just solid vented?
Obviously the wrong listing .

pad retainers and bolt hole size imperial and metric

Pikey · Jun 30, 2013

jamesmartin said:
pad retainers and bolt hole size imperial and metric

that's for fronts tho surely?? rears have larger discs on later models.

jamesmartin · Jun 30, 2013

redhand said:
that's for fronts tho surely?? rears have larger discs on later models.

no 90s use the same as disco and rrc ftc1381,110s use ftc3846 which is exactly same dimensions and offset as frc7329 std solid front

Pikey · Jun 30, 2013

so will a pair of twin feed front calipers fit on the rears???? if I blank one of the feeds off???? Or am I clutching at straws??

jamesmartin · Jun 30, 2013

rear calipers are smaller in that they have 2 pistons not 4 ,so bolt holes closer together

Pikey · Jun 30, 2013

jamesmartin said:
rear calipers are smaller in that they have 2 pistons not 4 ,so bolt holes closer together

Cheers knew it was too good an idea to work

Cos I've got a pair of brand new twin feed, 4 pot front callipers sitting in workshop doing fook all...

noo rear calipers it is then

jamesmartin · Jun 30, 2013

the britpart cheap calipers are ok £25ish for rears

Pikey · Jun 30, 2013

jamesmartin said:
the britpart cheap calipers are ok £25ish for rears

Aye will have to order a new pair. I reckon these I have must be for a 90. cos the distance from mounting hole to the point where they sit on top of the disc is 10mm shorter, than the ones that are on mine now.

jamesmartin · Jun 30, 2013

discs are the same diameter so not that then

Pikey · Jun 30, 2013

soo just to confirm I'm after STC1268 & 1269 for a 96 110 Vin HA onwards???

Pikey · Jun 30, 2013

jamesmartin said:
discs are the same diameter so not that then

In that case I will have to google the Lockheed part number off the caliper and see what they're supposed to fit??

Listing says 110 defenders. But as I said earlier no way will the mounting holes line up with the holes in the brackets. as they don't reach down far enough. Same width apart. but about 10mm shorter??

jamesmartin · Jun 30, 2013

yes stc1269 and 68

Pikey · Jul 6, 2013

Today I fitted my £5 ebay bargain..

and tried not to melt whilst refitting the rooflining rewiring the lights and fitting sun Visors etc. Removed em all at B&W show when I did the body capping.

Oh and I've pikied an Axle guard for it....

matty_daak · Jul 6, 2013

I did wonder what you were up to at the show... thought the weather was a bit dodgy for a topless conversion

Living with a Cheapo defender,

Well-Known Member

Dummy Ejection Facilitator..

2000 4.6 Vouge

Dummy Ejection Facilitator..

2000 4.6 Vouge

Dummy Ejection Facilitator..

Well-Known Member

Dummy Ejection Facilitator..

Well-Known Member

Dummy Ejection Facilitator..

Well-Known Member

Dummy Ejection Facilitator..

Well-Known Member

Dummy Ejection Facilitator..

Well-Known Member

Dummy Ejection Facilitator..

Dummy Ejection Facilitator..

Well-Known Member

Dummy Ejection Facilitator..

Active Member

Similar threads