l322 4.4 tdv8 not starting

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

_ASH_

Member
Posts
82
Location
Staffordshire UK
Hi Guy's, my 4.4 TDV8 broke down on me a week ago, ive out just managed to get my SDD software working.

It turns over, but doesn't fire.

I've attached the SDD fault codes & would appreciate if you could have a look & tell me if I'm missing something.

Many thanks in advance

ASH
 
What year?

But of those codes I would say the engine oil ones would be the issue.
I will look up those codes in the morning for a 2011.

J
 
If the transfer pump doesn't work then fuel could be all in one side.
If it thinks it's run out, i think there's a minimum you need to put in before it will allow a start. Not sure what that is, depends how much you put in and which side the pickup/level sender is.
Others will know more than me
 
Found these.
But still havent found anything to say they would give a no start situation.

Have you tried to clear the faults, then see what comes back?

J
 

Attachments

  • P040D.pdf
    221.4 KB · Views: 160
  • P0195.pdf
    265.9 KB · Views: 171
  • P250A.pdf
    289.6 KB · Views: 158
You must log in or register to reply here.

Similar threads

A
Range Rover not starting.
2 3
Replies
42
Views
4K
_ASH_
A
A
4.4 tdv8 not starting
Replies
7
Views
2K
_ASH_
A
J
This week I cleaned the DPF on my L322 TDV8 4.4
Replies
13
Views
2K
lynall
L
A
P0A94 2011 4.4 TDV8 Range Rover
2
Replies
33
Views
3K
Graculus
Graculus
A
TDV8 rail pressure / not starting
Replies
4
Views
2K
_ASH_
A
Back
Top