Need one cheap then or something I could modify for free
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
doriz
Well-Known Member
- Posts
- 17,312
3 nights in and I’m red wine fit. Prolly a new record.
- Posts
- 16,352
- Location
- Benfleet, Essex
Steerer tube from a bike and a little bit of welding?Afternoon
Looking for inspiration
Need something like this only a lot smaller, and with L bracket rather than straight across.
Either that or a 5 or 6 inch diameter flat wheel with bearing I could bolt horizontal to chassis
It's to convert sideways to fore and aft on my steering, any ideas on what I could use/convert to make this happen please ?
This is something from a bike building plan. All the bits are standard bits salvaged from bikes in mild-steel and some welding.
Good idea
Not sure whether outside would be better static with inside turning so I could weld the outer to the chassis at front, that would work at steering rack position if a little low, maybe sit it on top of chassis
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
Hippo
Lord Hippo
- Posts
- 53,837
Tis a shame we dun't know anyone wiv er layv.Need one cheap then or something I could modify for free
- Posts
- 16,352
- Location
- Benfleet, Essex
Morning All.
A bit cool & damp here.
Done my early morning chores, now for a chat with a mate from oop-north.
Have a great day.
A bit cool & damp here.
Done my early morning chores, now for a chat with a mate from oop-north.
Have a great day.
I got some tube and bits of scrap, maybe I can make something up that's strong enough
- Posts
- 44,814
- Location
- East Dorset
Raining yet a flipping gain!
W being annoying cos she thinks her knee is mended so I am having to to work hard to help her put it on light duties.
Domestics and fiddling around in the utility in prospect.
Life's tapestry is so rich.
Have a nice day!
W being annoying cos she thinks her knee is mended so I am having to to work hard to help her put it on light duties.
Domestics and fiddling around in the utility in prospect.
Life's tapestry is so rich.
Have a nice day!
Attachments
Western Slope Rover
Well-Known Member
- Posts
- 4,073
- Location
- On a mesa
I don't want to save our democracy. I want to save our republic.
Hopefully before I die.
Hopefully before I die.
Last edited:
- Posts
- 6,592
- Location
- uk
You better wear a cricket box for a few days, just in caseW being annoying cos she thinks her knee is mended so I am having to to work hard to help her put it on light duties.
Both swivel points fitted, just hope 3mm plate will be strong enough for the steeringGOT IT
Cut from Mobility scooter swinging arms and I have two, happy days
Attachments
Stone56
Well-Known Member
- Posts
- 3,213
- Location
- Up a mountain
- Posts
- 16,352
- Location
- Benfleet, Essex
That I have been flea-combing the cat and have killed 4 fleas so far.
Gosh they move quite fast. Just imagine the time when most humans had fleas too. Yuk!
The biggest factor in the decline of fleas in our homes was the introduction of the vacuum-cleaner.
Gosh they move quite fast. Just imagine the time when most humans had fleas too. Yuk!
The biggest factor in the decline of fleas in our homes was the introduction of the vacuum-cleaner.
Stone56
Well-Known Member
- Posts
- 3,213
- Location
- Up a mountain
Get a grinder on it
- Posts
- 44,814
- Location
- East Dorset
So why didn't you vacuum clean the cat???That I have been flea-combing the cat and have killed 4 fleas so far.
Gosh they move quite fast. Just imagine the time when most humans had fleas too. Yuk!
The biggest factor in the decline of fleas in our homes was the introduction of the vacuum-cleaner.
- Posts
- 44,814
- Location
- East Dorset
Achieved very little today mostly due to GIHT!
Grrrrrr!!!!!
Grrrrrr!!!!!
Similar threads
