- Posts
- 16,352
- Location
- Benfleet, Essex
Morning All. 
Lovely day here one could almost believe in a Spring season.
Have a great day.
Lovely day here one could almost believe in a Spring season.
Have a great day.
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 12,093
- Location
- Far out West
Usually because they are so heavy. There’s a new defender and it often struggles too again because of their weight while the old defenderers sail up the slope
- Posts
- 44,813
- Location
- East Dorset
Mormin all!
- Posts
- 22,901
- Location
- In the next Glen
Nowt wrong with it, she just finds it hard to park in town so im selling it.
- Posts
- 22,901
- Location
- In the next Glen
Feeling all yuck today runny nose n sore napper. Tis dry here tho.
- Posts
- 12,093
- Location
- Far out West
Sounds a lot like Ebola. Better get checked outFeeling all yuck today runny nose n sore napper. Tis dry here tho.
- Posts
- 6,592
- Location
- uk
Probably leprosy. Don't blow your nose too hard or you'll lose itFeeling all yuck today runny nose n sore napper. Tis dry here tho.
Afternoon 
Looking for inspiration
Need something like this only a lot smaller, and with L bracket rather than straight across.
Either that or a 5 or 6 inch diameter flat wheel with bearing I could bolt horizontal to chassis
It's to convert sideways to fore and aft on my steering, any ideas on what I could use/convert to make this happen please ?
Looking for inspiration
Need something like this only a lot smaller, and with L bracket rather than straight across.
Either that or a 5 or 6 inch diameter flat wheel with bearing I could bolt horizontal to chassis
It's to convert sideways to fore and aft on my steering, any ideas on what I could use/convert to make this happen please ?
Attachments
Last edited:
doriz
Well-Known Member
- Posts
- 17,312
- Posts
- 68,227
- Location
- The Wooly Witch
No, frost here, despite being 1.5°C, it seemed very dry in the air ...
- Posts
- 16,352
- Location
- Benfleet, Essex
I tried to a tiny bit of welding today, and it was awful.
I hang my head in shame. With the workshop round the other way the Sun was behind me and getting into my welding helmet and I could not see anything clearly. The cables were all strung across the floor like a set of "death-trap" safety hazards.
Just the worst ever. So maybe I will swap it all back round again.
I hang my head in shame. With the workshop round the other way the Sun was behind me and getting into my welding helmet and I could not see anything clearly. The cables were all strung across the floor like a set of "death-trap" safety hazards.
Just the worst ever. So maybe I will swap it all back round again.
Attachments
Not for me to judge , I'm useless as well
I've started to use 1.6 rods on 35 amps which gives me more time to get it straight before everything melts
WhiskyLassie
Well-Known Member
- Posts
- 5,470
- Location
- Uk
That's good, I'm out in the sticks.
WhiskyLassie
Well-Known Member
- Posts
- 5,470
- Location
- Uk
That's a good effort.
Hippo
Lord Hippo
- Posts
- 53,837
Bnq do little wheelsAfternoon
Looking for inspiration
Need something like this only a lot smaller, and with L bracket rather than straight across.
Either that or a 5 or 6 inch diameter flat wheel with bearing I could bolt horizontal to chassis
It's to convert sideways to fore and aft on my steering, any ideas on what I could use/convert to make this happen please ?
Would have to be steel so I could weld arms on and have a bearing in the middle for stability
Hippo
Lord Hippo
- Posts
- 53,837
Does yer need just the wheel and bearing int middle?Would have to be steel so I could weld arms on and have a bearing in the middle for stability
Does the wheel need to be metal or rubber tyre?
Can yer use a wheel like yer fit under a box that has its own bracket to hold said wheel?
Open to suggestions
Attachments
Hippo
Lord Hippo
- Posts
- 53,837
Eye fink the rhs one will be strongerer. Use a wheel wiv bearing. Drill oles frew said wheel.Open to suggestions
Similar threads
