- Posts
- 22,904
- Location
- In the next Glen
What a belter of a day, nice crisp sunshine 
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 22,904
- Location
- In the next Glen
WhiskyLassie
Well-Known Member
- Posts
- 5,475
- Location
- Uk
Evening all, hope all is well. Away to bed.
- Posts
- 44,832
- Location
- East Dorset
WhiskyLassie
Well-Known Member
- Posts
- 5,475
- Location
- Uk
- Posts
- 22,904
- Location
- In the next Glen
Right peeps...... at last ive got the blasted mini going 
& its driving with no engine faults. Managed to re-code everything
abs/dsc/footwell module/fuel pump/ecu reset to factory/steering angles/throttle body ect ect bla bla bla bla bla....................
I think whats happened is the lad the cloned the ecu put the old faults into the new one. (who knows)
& its driving with no engine faults. Managed to re-code everything
abs/dsc/footwell module/fuel pump/ecu reset to factory/steering angles/throttle body ect ect bla bla bla bla bla....................
I think whats happened is the lad the cloned the ecu put the old faults into the new one. (who knows)
- Posts
- 44,832
- Location
- East Dorset
Well done!Right peeps...... at last ive got the blasted mini going
& its driving with no engine faults. Managed to re-code everything
abs/dsc/footwell module/fuel pump/ecu reset to factory/steering angles/throttle body ect ect bla bla bla bla bla....................
I think whats happened is the lad the cloned the ecu put the old faults into the new one. (who knows)
I'd ask you how you did it only I know I wouldn't understand the answer!!!
- Posts
- 44,832
- Location
- East Dorset
Lost the plot on this one really. How long has thie blessed motor been off the road and how long has your missus been driving around in summat else? Or hasn't she?Right peeps...... at last ive got the blasted mini going
& its driving with no engine faults. Managed to re-code everything
abs/dsc/footwell module/fuel pump/ecu reset to factory/steering angles/throttle body ect ect bla bla bla bla bla....................
I think whats happened is the lad the cloned the ecu put the old faults into the new one. (who knows)
We were thinking of maybe getting one but all the probs you have had with them has well put us off!
- Posts
- 22,904
- Location
- In the next Glen
Well done!
I'd ask you how you did it only I know I wouldn't understand the answer!!!
Tis a bit easier when you have the right equipment to do it, just a matter of going through the system & checking the function
of everything, then if something has a fault its a matter of testing it. My diagnostics has programming & special functions for
most vehicles up to 2021. Ive been leaving my phone in the house so I dont get distracted as you loose where you were.
Ive got another key to program I will give that a go when ive got the chance.
- Posts
- 22,904
- Location
- In the next Glen
I dont thing id buy another one tbh, they drive really well the parts are cheap & they arent hard to work on. Might have just
been unlucky. My mate has a track car same model & it gets thrashed but its been reliable. ???
- Posts
- 6,593
- Location
- uk
Happy missus now?Right peeps...... at last ive got the blasted mini going
- Posts
- 13,787
- Location
- The Principality
It was good here too, I did comment to a fellow dog walker that it almost felt like a spring day.What a belter of a day, nice crisp sunshine
- Posts
- 44,832
- Location
- East Dorset
I get the feeling that, on the quiet, you are quite an electronic whizz. I take off my bunnet to you!Tis a bit easier when you have the right equipment to do it, just a matter of going through the system & checking the function
of everything, then if something has a fault its a matter of testing it. My diagnostics has programming & special functions for
most vehicles up to 2021. Ive been leaving my phone in the house so I dont get distracted as you loose where you were.
Ive got another key to program I will give that a go when ive got the chance.
Hippo
Lord Hippo
- Posts
- 53,847
Is the bit the rev sensor is measuring connected to earth? Like iffits measuring the fly wherl spinning on a car. Is the metal body of the laith earthed? Figures jumping about like that reminds me of a situation where a sensor ain't reading a signal fast enuff. Like measuring a sine waveyer have to measure at twice the frequency of said wave as a minimum or yer figures bounce around..... well that was disappointing.
The Rev Counter for the lathe refuses to work correctly.
Most likely culprit was/is EMI causing the detected transducer pulses to get swamped so there was no clean signal.
I tried putting the whole transducer and its cable tail in a shielding braid earthed at one end but it has made no difference.
I have run out of ideas and the only remaining option appears to be to put the whole VFD inside a faraday cage/tin box.
This might work but as it needs to be air-cooled it may mean buying some perforated sheet to make a box from.
I wonder if shoving a biscuit tin over the VFD would be a good temporary test? Hmmmmm.......
Can yer rig up the sensor monitoring somefink else which is slower like a drill or food mixer? At lower speeds it may show reliable results. What type of sensor issit?
Hippo
Lord Hippo
- Posts
- 53,847
Wot fing is yer using to do this?Tis a bit easier when you have the right equipment to do it, just a matter of going through the system & checking the function
of everything, then if something has a fault its a matter of testing it. My diagnostics has programming & special functions for
most vehicles up to 2021. Ive been leaving my phone in the house so I dont get distracted as you loose where you were.
Ive got another key to program I will give that a go when ive got the chance.
WhiskyLassie
Well-Known Member
- Posts
- 5,475
- Location
- Uk
Morning it's mildly moist today
- Posts
- 7,877
- Location
- East Midlands
Anybody getting any snow? It was a possibility in the forecasts a few days ago. We've just got drizzle.
Similar threads
