I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Stone56 said:
What was it then enyone know ?
Click to expand...

Still no
1706733521646.png

1706733599445.png
 
marjon said:
Dan You have done a fantastic job, but can I point out something. Going to anyway.

Please reposition your box so you are not going over the top of rotating equipment, and make the E-stop in a better place at the same time. Even your sleeves give me shudders.

Sorry call me old fashioned or scared.

J
Click to expand...
Yup, understood, and I share the view.
The whole kit & kaboodle is on the wooden board and can be repositioned (within cable length limits).
The thing is if you look at any mini-lathe or even the midi-lathes, guess where the e-stop button etc. is?

Yup! Not a million miles from that dangerous spinny-thing. :)
1706737526152.png
1706737591078.png
 
marjon said:
Dan You have done a fantastic job, but can I point out something. Going to anyway.

Please reposition your box so you are not going over the top of rotating equipment, and make the E-stop in a better place at the same time. Even your sleeves give me shudders.

Sorry call me old fashioned or scared.

J
Click to expand...
I'm glad you said this. I didn't dare.
But part of my job in 75-6 was planning pneumaticly operated safety systems and thus I agree with what you say!
In fact I'd put it on the front of the machine, in the middle, i.e. at a point where it can be reached easily by a hand, a knee, a hip, a foot in fact any part that isn't caught in the machinery! If it would get in the way of operating the machine then ...... a foot switch.
I used to have to design safety screen mechanisms that locked into place once closed, the operation couldn't start until said screen was locked and the screen couldn't be opened until the operation was over. Think presses for panels in car factories. BL Oxford was one of my customers. Health and Safety at Work Act came in in 1974 and I started the job in early 75.

I do appreciate that Dan doesn't need any of this latter, but still, I've caught enough clothing in things like angle grinders to think along the same lines as yourself. ;)
 
You must log in or register to reply here.

Similar threads

H
Defender battery - what I fitted
Replies
8
Views
894
johnlad
johnlad
G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
1K
SteveMarquis
SteveMarquis
R
Am I mad for buying another Disco 4?
Replies
9
Views
1K
lynall
L
A
L322 L322 V8; Clicking noise (like a relay) from passenger side
Replies
4
Views
710
biketeacherdave
biketeacherdave
TITCH SANDERS
P38 Manual seats to Electric (again)
Replies
19
Views
1K
TITCH SANDERS
TITCH SANDERS
Back
Top