Need to wuk oot if eye can make a black un decker proline pl40 circular saw into a track saw.
Need to wuk oot if eye can make a black un decker proline pl40 circular saw into a track saw.
Found this one. My saw will wobble so making one that supports both sides is betterer. Pic at the beginning. Jump to 6 minutes as he rattles about saws at the beginning.
Gorra table saw anorl. Discounted from argos 20 years ago. Fink they knew the guide rails cut into it were not the same width along the lenf. Keep meaning to mount it inner big sheet of removeable wood as the rip fence is naff anorl. Only fing eye likes about it were arf price and fink its 85mm cut.Fab, I have a table saw so use that when I am feeling very brave.
I can use it but I dislike it, because I know how dangerous it is.Gorra table saw anorl. Discounted from argos 20 years ago. Fink they knew the guide rails cut into it were not the same width along the lenf. Keep meaning to mount it inner big sheet of removeable wood as the rip fence is naff anorl. Only fing eye likes about it were arf price and fink its 85mm cut.
Weekend - what's one of them?Happy weekend
Best of luck with it mate!
Hope it goes well
I still have 34 years of them before I can retireWeekend - what's one of them?
Not being a boatist, would you mind telling the uninitiated what the heck the point was of the foam in the first place?
Heat insulation?
Sound insulation?
Cos it sounds like poop if it gets wet in, guess what, a boat!
I thought that the "foam" used on such things was the "sealed cell" variety which basically means it is a way of filling a void with a flotation device full of tiny little air-bubbles.To prevent it from sinking if you stuff it. It still sinks but seemingly it slows it down.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!