I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I am pleased to have made my first part on the Boxford lathe. :D
It isn't for me but for a friend.
It is a little alignment tool to allow a shaft collar to be aligned with a bottom bracket cup and welded to it.
I thoroughly enjoyed it and it’s the first real thing made on the Boxford.
A piece of 30mm round bar fits snug inside the cup, the 18mm section fits snug inside the hole in the cup, and the protruding boss is about 12.5mm long and 16.99 mm diameter to fit the 17mm shaft collar.

All very much certain to ensure perfect alignment. :D
 

Attachments

  • IMG_20240307_133601_704.jpg
    IMG_20240307_133601_704.jpg
    204.7 KB · Views: 69
  • IMG_20240307_133631_907.jpg
    IMG_20240307_133631_907.jpg
    243.9 KB · Views: 65
following on from @Hippo post about webuyyourcarfornowt.com, I had a look on Mercedes web site (idly thinking of buying a new one), and as they have a fill in box to value your trade in, I plugged me tratter info in. Valued at £22600 trade in - which is a drop of less than 3k sovs compared to what I paid for it at a dealer 11+ years ago. Held its value well :cool:. So, do I go for a new merc, which will plummet in value to about 30% of its buying price in about 4 years, or stick with me tratter which might even go up in value in that same time. Easy decision really - and I can still fix me tratter with a couple of hammers and some big spanners.
 
If peeps remember I got a free boat a couple of weeks ago....one in question I did work on about 10 years ago lol
It wasnt until I spoke to the yard owner & said that boat had over 100k spent on it & it came from Cameron house
the penny dropped I knew the owner. I done gelcoat repairs on it & I remember it had a full refit 2 fully recon Detroit
engines & drive legs full interior trim & rewired everything in the boat was replaced for new. :oops: :oops:
The lad let his dad drive it & he hit another boat in the marina, its sat ever since. I trolled though my pics n found
one when it was white (now has been wrapped) an my old m3 haha
IMG00110-20130716-1649_zps9a708a96.jpg
 
kevstar said:
If peeps remember I got a free boat a couple of weeks ago....one in question I did work on about 10 years ago lol
It wasnt until I spoke to the yard owner & said that boat had over 100k spent on it & it came from Cameron house
the penny dropped I knew the owner. I done gelcoat repairs on it & I remember it had a full refit 2 fully recon Detroit
engines & drive legs full interior trim & rewired everything in the boat was replaced for new. :oops: :oops:
The lad let his dad drive it & he hit another boat in the marina, its sat ever since. I trolled though my pics n found
one when it was white (now has been wrapped) an my old m3 haha
View attachment 312130
Click to expand...
E46?
 
Stanleysteamer said:
So you got a free boat that once had £100k spent on it? Or do I need reading glasses?

Wish I was born under the same star as you!
Click to expand...

No your reading is fine lol I remember at the the time thinking why would you spend so much but he did say
he was into it for 60k so might as well finish it. Think he had a dream....
 
You must log in or register to reply here.

Similar threads

H
Defender battery - what I fitted
Replies
8
Views
895
johnlad
johnlad
G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
1K
SteveMarquis
SteveMarquis
R
Am I mad for buying another Disco 4?
Replies
9
Views
1K
lynall
L
A
L322 L322 V8; Clicking noise (like a relay) from passenger side
Replies
4
Views
712
biketeacherdave
biketeacherdave
TITCH SANDERS
P38 Manual seats to Electric (again)
Replies
19
Views
1K
TITCH SANDERS
TITCH SANDERS
Back
Top