Tenebreaux
Well-Known Member
- Posts
- 4,266
- Location
- Armagh
Genius 5. And I just ordered a GB50 jump starter.
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 9,087
- Location
- North Lincs
Morning.
- Posts
- 8,974
- Location
- Solent
Frosty again
WhiskyLassie
Well-Known Member
- Posts
- 5,442
- Location
- Uk
Morning all, up early to defrost vehicles and get the other half away back in bed until i need to leave my pit.
Hippo
Lord Hippo
- Posts
- 53,698
Sounds dangerous. Bear in mind a standard 13A uk socket aint rated high enuff to take 3.5kw of lectric. If it goes above its rating it will over heat. Thats assuming its in good service and there's no wear on the pins.Plan is to let it all die when they turn the grid off, drop the incoming breaker, start the genny and plug the sewer-side cable (2.5mm mains cable with plugs either end) into the Genny and the closest mains socket and let it "back-feed" to the main bars in the distribution board and then on to the lighting rings etc.
A bit like "wives & mistresses", as long as the grid and the genny don't ever meet up then the 3.5kW of the genny should run the essentials.
Last edited:
- Posts
- 16,241
- Location
- Benfleet, Essex
Same Noco Charger as me.
Good to know they respond so well.
- Posts
- 16,241
- Location
- Benfleet, Essex
Morning All.
A bit "warmer"? @ 0° today.
Up to the smoke for beers and a joke. Meeting all my old (1970's) IBM buddies.
Have a good day.
A bit "warmer"? @ 0° today.
Up to the smoke for beers and a joke. Meeting all my old (1970's) IBM buddies.
Have a good day.
- Posts
- 13,780
- Location
- The Principality
Have a good time and enjoy yourself.Morning All.
A bit "warmer"? @ 0° today.
Up to the smoke for beers and a joke. Meeting all my old (1970's) IBM buddies.
Have a good day.
- Posts
- 13,780
- Location
- The Principality
Minus 3 overnight so nice and white this morning but that didn't stop the canines going out a 6am to contiue their snooze out there - brrr.
- Posts
- 16,241
- Location
- Benfleet, Essex
Yes, just because the genny can supply 3200 watts doesn't mean you would always pull 3200 watts continually. But 3200w / 240v is only around 13A So the fuse will blow and protect everything.
- Posts
- 33,374
- Location
- North Shropshire
Tons of that silicone shine stuff that comes off on your fingers.. and a smelly air fresh that was anything but!! That was the first thing to go!!is it @ll polished n smelling nice then.
Needs a clean to get all the cr@p off and then a load of leather conditioner. The worst bit is the screen where someone has knackered wipers scratch it
- Posts
- 33,374
- Location
- North Shropshire
Least i hope that's what it is
- Posts
- 33,374
- Location
- North Shropshire
Don't need a plug, just hold the bare wires in place with the board fuse /circuit breakerYes, just because the genny can supply 3200 watts doesn't mean you would always pull 3200 watts continually. But 3200w / 240v is only around 13A So the fuse will blow and protect everything.
maybe not that sounds rough even for me
- Posts
- 16,241
- Location
- Benfleet, Essex
Nahhhh, I think I will stick with plan "A".Don't need a plug, just hold the bare wires in place with the board fuse /circuit breaker
- Posts
- 44,557
- Location
- East Dorset
Mornin all just off on foot, in the cold to collect a present.
Taking my phone to prove it's me an I ordered it! (CBA to print the email off.)
(I is sooo down wiv da kidz!!!)
Bright and sunny and Waitrose delivered all the booze we ordered which seeing as it was all on speshul I was surprised at.
Have a laaarvely day folks!!
in the cold to collect a present.Taking my phone to prove it's me an I ordered it! (CBA to print the email off.)
(I is sooo down wiv da kidz!!!)
Bright and sunny and Waitrose delivered all the booze we ordered which seeing as it was all on speshul I was surprised at.
Have a laaarvely day folks!!
- Posts
- 22,787
- Location
- In the next Glen
i h@te th@t shinny silicoont stuff yuk
- Posts
- 22,787
- Location
- In the next Glen
@fternoon @ll h@ving @ proper lunch bre@k tis gre@t
got @ reply from the seller of the l@ndy i w@s bidding on..........
Hi all spares are to go with the truck, axles & TB were fine so have just changed the oil. Suspension & engine fully rebuilt with new clutch, timing belt. Richards chassis 2000, Turner engineering recon unit 45000, bulkhead 1400, BFG tyres 600. Much cost & time already put in - the reserve is 8000£
so re@lly he w@nts b@ck wot he's spent on it 8k i spent under six gr@nd on my l@st one
@ th@t w@s it p@inted. wonder if he w@nts to keep the turners engine lol
tis gre@t got @ reply from the seller of the l@ndy i w@s bidding on..........
Hi all spares are to go with the truck, axles & TB were fine so have just changed the oil. Suspension & engine fully rebuilt with new clutch, timing belt. Richards chassis 2000, Turner engineering recon unit 45000, bulkhead 1400, BFG tyres 600. Much cost & time already put in - the reserve is 8000£
so re@lly he w@nts b@ck wot he's spent on it 8k
i spent under six gr@nd on my l@st one@ th@t w@s it p@inted. wonder if he w@nts to keep the turners engine lol
- Posts
- 44,557
- Location
- East Dorset
Trouble is, once put together they go for shedloads more. Have to ask why he isn't finishing it. Mebbe he is in a hole and desperate for the dosh.@fternoon @ll h@ving @ proper lunch bre@k
got @ reply from the seller of the l@ndy i w@s bidding on..........
Hi all spares are to go with the truck, axles & TB were fine so have just changed the oil. Suspension & engine fully rebuilt with new clutch, timing belt. Richards chassis 2000, Turner engineering recon unit 45000, bulkhead 1400, BFG tyres 600. Much cost & time already put in - the reserve is 8000£
so re@lly he w@nts b@ck wot he's spent on it 8k
@ th@t w@s it p@inted. wonder if he w@nts to keep the turners engine lol
Be interesting to see what he accepts, or if he will withdraw. He may have spent that money but it is all secondhand now and he didn't mention the Gbox.
- Posts
- 6,551
- Location
- uk
Had my second visit to the lug klinik today, but they failed to decoke them again. Referring to the lump of wax, she (young lady) said it was big and hard and she couldn't do anything with it. I said nothing as she had a skewer in my lug at the time . So another week of squirting Castrol R in and another visit next week.
. So another week of squirting Castrol R in and another visit next week.Similar threads
