- Posts
- 44,667
- Location
- East Dorset
and apparently them clogging up isn't necessarily just due to not having long runs from time to time. It could be a symptom of other underlying problem(s).
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 44,667
- Location
- East Dorset
Well if it is part of the deal then it really shouldn't be an issue, should it? Then you can read up on it once you get it.
- Posts
- 9,087
- Location
- North Lincs
Ah there you go, geography never was my strong pointThat's anywhere north of The Wall, so not that far really.
- Posts
- 33,450
- Location
- North Shropshire
Yes I've heard a seized egr valve can cause dpf problems too
DevonGuy
Well-Known Member
- Posts
- 3,124
- Location
- North Devon
Zleep well frens. Us boys be tired as a warreners ferret. Zee yer orl zoon.
- Posts
- 16,304
- Location
- Benfleet, Essex
Italian tune-up's required and long-hot journeys to burn off the crap.?
- Posts
- 16,304
- Location
- Benfleet, Essex
Night all.
Too tired to stay up.
See ya's
Too tired to stay up.
See ya's
- Posts
- 44,667
- Location
- East Dorset
Just in case anyone is still up.
want to buy an air powered reciprocating saw.
I'm looking at Sealey,
anyone have a favourite and why?
cheers
Stan.
want to buy an air powered reciprocating saw.
I'm looking at Sealey,
anyone have a favourite and why?
cheers
Stan.
- Posts
- 8,982
- Location
- Solent
Mornin
Snot rainin
Kitching decorators in today
A whole day of training awaits.. bliss
Snot rainin
Kitching decorators in today
A whole day of training awaits.. bliss
- Posts
- 9,087
- Location
- North Lincs
Morning, cold today. Warm enough in doors though
- Posts
- 13,784
- Location
- The Principality
Wet, again.
WhiskyLassie
Well-Known Member
- Posts
- 5,461
- Location
- Uk
Good morning, wee bit nippy today.
- Posts
- 16,304
- Location
- Benfleet, Essex
Morning All
A tad late, didn't sleep too well.
Paper's got, Coffee's 'ot.
CH failed (boiler overheat again) TBF I had dropped the pump speed down a tad so that's my fault.
All up & running again. Have a great day!
A tad late, didn't sleep too well.
Paper's got, Coffee's 'ot.
CH failed (boiler overheat again) TBF I had dropped the pump speed down a tad so that's my fault.
All up & running again. Have a great day!
- Posts
- 6,575
- Location
- uk
A battery powered one. I bought an air driven chisellling tool many years ago, a very good tool but having to faff with an extension cable and air lines was a nuisance, and my small compressor didn't have enough tank to keep it running for long and had to wait for it to refill all the time. Last year I bought a battery drill, the cable powered drill is now retired. Don't know why I didn't get one years ago. (I do really, I'm a tight wadJust in case anyone is still up.
want to buy an air powered reciprocating saw.
I'm looking at Sealey,
anyone have a favourite and why?
cheers
Stan.
).Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
Why do you want a air powered recip saw? I think all air powered tools are too noisey and you need to fire up a compressor. My electric one is fine but I sometimes use my chainsaw just for the fun of it.Just in case anyone is still up.
want to buy an air powered reciprocating saw.
I'm looking at Sealey,
anyone have a favourite and why?
cheers
Stan.
Col
- Posts
- 44,667
- Location
- East Dorset
I'm a tight wad too as many on here are aware!A battery powered one. I bought an air driven chisellling tool many years ago, a very good tool but having to faff with an extension cable and air lines was a nuisance, and my small compressor didn't have enough tank to keep it running for long and had to wait for it to refill all the time. Last year I bought a battery drill, the cable powered drill is now retired. Don't know why I didn't get one years ago. (I do really, I'm a tight wad
But this will be a pressy from my daughter and her noo husband. Airpowered ones are cheaper and I already have the compressor with a biggish cap tank, so am all set up really. but I can see that if I was going to go in the house with it a batt one might be better. The compressor is already in the garage so if I wanted to work with it on the bench it'd be just fine.
- Posts
- 8,982
- Location
- Solent
Rainin like bugger now, windy blow anorl!
- Posts
- 44,667
- Location
- East Dorset
Afternoon all.
got up a bit late as the weather is totally sh!t.
Cold and very wet.
Have as good a day as you can.
got up a bit late as the weather is totally sh!t.
Cold and very wet.
Have as good a day as you can.
- Posts
- 44,667
- Location
- East Dorset
Air-powered reciprocating saws:
lighter,
cheaper, even the best quality ones cost less than the cheapest batt or corded
can get into smaller places
don't need to charge batts which also wear out eventually.
electric ones get hot.
Yes they need a compressor with decent air delivery, I've already got one.
Yes they are noisy but then all are, at least I can shut the door on the compressor so the only noise will be the saw itself, and I'll be using it out doors mostly, or in the garage workshop where its noise would only bother me and I can wear ear muffs.
This is why I want one.
Also with money saved I could buy other air powered tools like a die grinder, which can be fitted with a thin circular saw blade for fine work.
So what do people think? Sealey?
lighter,
cheaper, even the best quality ones cost less than the cheapest batt or corded
can get into smaller places
don't need to charge batts which also wear out eventually.
electric ones get hot.
Yes they need a compressor with decent air delivery, I've already got one.
Yes they are noisy but then all are, at least I can shut the door on the compressor so the only noise will be the saw itself, and I'll be using it out doors mostly, or in the garage workshop where its noise would only bother me and I can wear ear muffs.
This is why I want one.
Also with money saved I could buy other air powered tools like a die grinder, which can be fitted with a thin circular saw blade for fine work.
So what do people think? Sealey?
- Posts
- 44,667
- Location
- East Dorset
Sun shining now!
In a little while I'll go out and top up W's car with oil.
In a little while I'll go out and top up W's car with oil.
Similar threads
