I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Morning All :D
Still here, still grimacing smiling. :)
A rubbish night with broken sleep my neck is all "noisy" in the turns/moves, sounds like I am stirring a bucket of sand/gristle. :(
Family BBQ Monday, so of course that is forecast for the worst weather of the Easter break. :rolleyes:
Never mind, onwards & upwards eh? :D
 
Well............ This morning I find my new fridge is still at 20 degrees inside, motor hot but cold it's not
Second fridge in three days, Zanussi and I left it four hours to settle, set temp control on half way and switched on, been on all night and still at 20.
Same happened to the last one which was a Bosh
I should have gone to Currys, taking this back and see what they say as he assured me it was working as they had tested it
is it me ??
 
landowner said:
Well............ This morning I find my new fridge is still at 20 degrees inside, motor hot but cold it's not
Second fridge in three days, Zanussi and I left it four hours to settle, set temp control on half way and switched on, been on all night and still at 20.
Same happened to the last one which was a Bosh
I should have gone to Currys, taking this back and see what they say as he assured me it was working as they had tested it
is it me ??
Click to expand...
Fridges & freezers have to be left to stand switched-off upright for a few hours after they have been transported to allow the fluids to drain down in the compressor, else they will not work.

EG from the Beko Website.....
Relocating and Installing

Once your fridge has been safely moved into the kitchen of your new home, it needs some time to settle before you can start using it. You should let it stand unplugged, in an upright position, for at least 4 hours to allow its compressor oil to settle.
You can plug your appliance in once 4 hours have passed. Make sure that the thermostat control is set to ON but don’t start loading food right away. Allow your fridge some time to cool down to temperatures safe for food storage, which might take up to 12 hours.


For more information on installation, head over to our guide on how to install your Beko refrigerator.
 
DanClarke said:
Fridges & freezers have to be left to stand switched-off upright for a few hours after they have been transported to allow the fluids to drain down in the compressor, else they will not work.

EG from the Beko Website.....
Relocating and Installing

Once your fridge has been safely moved into the kitchen of your new home, it needs some time to settle before you can start using it. You should let it stand unplugged, in an upright position, for at least 4 hours to allow its compressor oil to settle.
You can plug your appliance in once 4 hours have passed. Make sure that the thermostat control is set to ON but don’t start loading food right away. Allow your fridge some time to cool down to temperatures safe for food storage, which might take up to 12 hours.


For more information on installation, head over to our guide on how to install your Beko refrigerator.
Click to expand...
Left it stood 3pm till 8.15pm before plugging in
 
BOURTON-LIFESTYLE-IMAGE.jpg
marjon said:
Still waiting on new MH pics from @derwendolly :) or have I missed them:oops:. J
Click to expand...

And here it is.
 
Last edited:
You must log in or register to reply here.

Similar threads

H
Defender battery - what I fitted
Replies
8
Views
895
johnlad
johnlad
G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
1K
SteveMarquis
SteveMarquis
R
Am I mad for buying another Disco 4?
Replies
9
Views
1K
lynall
L
A
L322 L322 V8; Clicking noise (like a relay) from passenger side
Replies
4
Views
712
biketeacherdave
biketeacherdave
TITCH SANDERS
P38 Manual seats to Electric (again)
Replies
19
Views
1K
TITCH SANDERS
TITCH SANDERS
Back
Top