I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 68,227
- Location
- The Wooly Witch
Mornin' all, tis dark out and damp maybe ...
- Posts
- 9,095
- Location
- North Lincs
The previous owner used it to move caravans about!& then stuck a tow bar on the front bumper
- Posts
- 9,095
- Location
- North Lincs
Morning, hope you all have a great day
Hicap phill
Well-Known Member
- Posts
- 16,237
- Location
- Wiltshire
Morning.
- Posts
- 8,999
- Location
- Solent
Mornin all.
Sky is brightening, looks cloudy
Best of luck to @My Old Landy ,
Have a nice day the rest of you.
Sky is brightening, looks cloudy
Best of luck to @My Old Landy ,
Have a nice day the rest of you.
- Posts
- 13,787
- Location
- The Principality
A damp mist hangs over the 'ills this morning but I'm not sure it is going to hang about for long, we have been promised a sunny day so I'll give it a bit of time before I complain.
I am going to sort out my holiday goodies today in an attempt to make sure I take everything I need this time.
I am going to sort out my holiday goodies today in an attempt to make sure I take everything I need this time.
- Posts
- 22,901
- Location
- In the next Glen
Morning all tis really foggy, I got woken up by a ships fog horn but I couldnt be bothered to
get up, im in no rush so I'll finish my tea then make a move.
Have a nice day ya'll
JimS
Well-Known Member
- Posts
- 10,711
- Location
- Not far enough away from London
I would just like to say, the humour of this builder was on a different level...
https://www.dailymail.co.uk/news/ar...g-doll-boarded-wall-saying-killed-family.html
https://www.dailymail.co.uk/news/ar...g-doll-boarded-wall-saying-killed-family.html
Glasgie
Well-Known Member
- Posts
- 3,396
- Location
- Renfrew Bonnie Scotland
Guid morn
Looking forward to a new week
Will get washing hung out and then persevere with summer house completions
Enjoy the week
Looking forward to a new week
Will get washing hung out and then persevere with summer house completions
Enjoy the week
- Posts
- 16,352
- Location
- Benfleet, Essex
Morning All
Cool and damp feeling here.
Paper retreived from the shop, hordes of school-kids navigated safely.
Buildering has resumed next door as he got a huge crane to lift his concrete floor-beams and steels over his house on Sat'dy.
20 minutes+ in the call queue for the Drs. only to be told the next Telephone appointment is 28th Sept 10..11AM. Scandalous I say, the GP service has truly gone into hiding and is avoiding patients as best it can.
Have a lovely day
Cool and damp feeling here.
Paper retreived from the shop, hordes of school-kids navigated safely.
Buildering has resumed next door as he got a huge crane to lift his concrete floor-beams and steels over his house on Sat'dy.
20 minutes+ in the call queue for the Drs. only to be told the next Telephone appointment is 28th Sept 10..11AM. Scandalous I say, the GP service has truly gone into hiding and is avoiding patients as best it can.
Have a lovely day
- Posts
- 13,787
- Location
- The Principality
I phoned Welsh Water this morning to own up to receiving a £30 cheque from them compensating me for the interrupted water supply which never happened and I was told that someone in the area must have been inconvenienced so it is a Good Will gesture to me 'just in case' and I should just bank it. Make of that what you want.
- Posts
- 6,592
- Location
- uk
Nice to know someone other than @kevstar can get stuff for nowtI phoned Welsh Water this morning to own up to receiving a £30 cheque from them compensating me for the interrupted water supply which never happened and I was told that someone in the area must have been inconvenienced so it is a Good Will gesture to me 'just in case' and I should just bank it. Make of that what you want.
- Posts
- 16,352
- Location
- Benfleet, Essex
They say you should never let a good-idea go "un-plagiarised", and so having had a long chat with my mate Paul about "how" to get short-little-legs around a big 24" wheel there seemed to be two clear alternatives:
Where the piece of strap/bar is located is where additional frame elements would be added for strengthening and stress-relief of the original frame's drop-out to "stay" elements.
This would provide an interference-free chainline with the BB shell located pretty-much where I need it to be.
Now it is easier to do if you turn the frame over and have the BB shell threads the wrong way around. But I suppose one could locktite them in place to avoid any issues?
What do you think?
Should be reasonably easy to do?
- Make your own triangle up from scratch and have all the worry about just "how" to avoid chainline to frame interference. Or..
- Use a pre-made triangle swiveled around to put the BB in the optimum "short-legs" position and marry up to it with additional frame elements.
Where the piece of strap/bar is located is where additional frame elements would be added for strengthening and stress-relief of the original frame's drop-out to "stay" elements.
This would provide an interference-free chainline with the BB shell located pretty-much where I need it to be.
Now it is easier to do if you turn the frame over and have the BB shell threads the wrong way around. But I suppose one could locktite them in place to avoid any issues?
What do you think?
Should be reasonably easy to do?
Last edited:
- Posts
- 13,787
- Location
- The Principality
I have to say that I am very impressed with all this work even though I don't have a clue what it all means - but it looks brilliant and I complement you for doing such a brill job.They say you should never let a good-idea go "un-plagiarised", and so having had a long chat with Paul about "how" to get short-little-legs around a big 24" wheel there seemed to be two clear alternatives:
So here is a pre-made frame with some "additional" drop-outs and frame members overlaid on top.
- Make your own triangle up from scratch and have all the worry about just "how" to avoid chainline to frame interference. Or..
- Use a pre-made triangle swiveled around to put the BB in the optimum "short-legs" position and marry up to it with additional frame elements.
Where the piece of strap/bar is located is where additional frame elements would be added for strengthening and stress-relief of the original frame's drop-out to "stay" elements.
This would provide an interference-free chainline with the BB shell located pretty-much where I need it to be. View attachment 248433
Now it is easier to do if you turn the frame over and have the BB shell threads the wrong way around. But I suppose one could locktite them in place to avoid any issues?
What do you think?
Should be reasonably easy to do?
Hicap phill
Well-Known Member
- Posts
- 16,237
- Location
- Wiltshire
LoctiteThey say you should never let a good-idea go "un-plagiarised", and so having had a long chat with my mate Paul about "how" to get short-little-legs around a big 24" wheel there seemed to be two clear alternatives:
So here is a pre-made frame with some "additional" drop-outs and frame members overlaid on top.
- Make your own triangle up from scratch and have all the worry about just "how" to avoid chainline to frame interference. Or..
- Use a pre-made triangle swiveled around to put the BB in the optimum "short-legs" position and marry up to it with additional frame elements.
Where the piece of strap/bar is located is where additional frame elements would be added for strengthening and stress-relief of the original frame's drop-out to "stay" elements.
This would provide an interference-free chainline with the BB shell located pretty-much where I need it to be. View attachment 248433
Now it is easier to do if you turn the frame over and have the BB shell threads the wrong way around. But I suppose one could locktite them in place to avoid any issues?
What do you think?
Should be reasonably easy to do?
As the BB will now be in the same rotation to undo as your pedal strokes.
Are these the old style ball bearing or new style BB cassettes?
- Posts
- 16,352
- Location
- Benfleet, Essex
Hi @Hicap phill I will most likely be using modern cartridge BB. So it will have to go in the wrong way round IF I do the frame round the way that is easiest for me to work on.
So to prevent precession undoing the BB shell caps I would put a bit of blue loctite on BOTH sides of the shell's threads. I have heard of others doing this with success when a LBS or manufacturer has threaded the BB shell incorrectly.
Hicap phill
Well-Known Member
- Posts
- 16,237
- Location
- Wiltshire
could you also put a small hole & grub screw in to the BB & cartridge ?
Afternoon folks.
well have carried on plodding on I am just glad I dont get paid for the amount of work I dont manage .
Hope to speak with Bruv tonight, not sure what to expect.
Passport office did not ring me back as they said they would, after a call to them on friday it was said somebody will ring you back from the correct dept within 24hrs, so I forgot the weekend days and figured Monday, Nope what a surprise. So gonna look for another phone number and gear up for an ear bashing cos its a bloody simple question to answer.
Hope everybody has got back into the swing of work again for a few days.
J
.well have carried on plodding on
I am just glad I dont get paid for the amount of work I do.Hope to speak with Bruv tonight, not sure what to expect
.Passport office did not ring me back as they said they would, after a call to them on friday it was said somebody will ring you back from the correct dept within 24hrs, so I forgot the weekend days and figured Monday
, Nope what a surprise. So gonna look for another phone number and gear up for an ear bashing cos its a bloody simple question to answer.Hope everybody has got back into the swing of work again for a few days
.J
I have to say that I am very impressed with all this work even though I don't have a clue what it all means - but it looks brilliant and I complement you for doing such a brill job.
I am with you
gave up pedal power years ago, plus I never looked good in Lycra. Leather yes.J
Similar threads
