I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Can anyone help graft a Freelander into this commercial from the EA just to try and keep our community safe please?
 

Attachments

  • 0D4CCA82-55F2-46C1-AA8E-AEC336D35038.jpeg
    0D4CCA82-55F2-46C1-AA8E-AEC336D35038.jpeg
    44.9 KB · Views: 81
I had a dabble with my new lathe yesterday, nothing "made" but just trying it out on whatever round stock I had to hand.
Having done all the usual "adjustments & fixes" for a lathe of this calibre I wanted to see how well/poorly it would cut and what kind of finish it would leave.
I am quite pleased with the results. Having purchased it purely on a whim, I now need to think of some things to build. ;)
From left to right we have Aluminium, Phosphor-Bronze, Mild Steel. All came out quite well. Hand-fed not using the lead-screw.
The scoundrels that sold me the lathe (with all the faults and a drive-train that ate itself in <3Hrs) have asked me to provide +ve feedback on their eBay ID.
Not going to happen.

20210121_135551.jpg
 
Last edited:
I had a dabble with my new lathe yesterday, nothing "made" but just trying it out on whatever round stock I had to hand.
Having done all the usual "adjustments & fixes" for a lathe of this calibre I wanted to see how well/poorly it would cut and what kind of finish it would leave.
I am quite pleased with the results. Having purchased it purely on a whim, I now need to think of some things to build. ;)
From left to right we have Aluminium, Phosphor-Bronze, Mild Steel. All came out quite well. Hand-fed not using the lead-screw.
The scoundrels that sold me the lathe (with all the faults and a drive-train that ate itself in <3Hrs) have asked me to provide +ve feedback on their eBay ID.
Not going to happen.
They are looking superb, the finish is very good. A bit of a cheek asking for positive feedback :eek:
 
I had a dabble with my new lathe yesterday, nothing "made" but just trying it out on whatever round stock I had to hand.
Having done all the usual "adjustments & fixes" for a lathe of this calibre I wanted to see how well/poorly it would cut and what kind of finish it would leave.
I am quite pleased with the results. Having purchased it purely on a whim, I now need to think of some things to build. ;)
From left to right we have Aluminium, Phosphor-Bronze, Mild Steel. All came out quite well. Hand-fed not using the lead-screw.
The scoundrels that sold me the lathe (with all the faults and a drive-train that ate itself in <3Hrs) have asked me to provide +ve feedback on their eBay ID.
Not going to happen.

20210121_135551.jpg
Leave a negative feedback that upsets peeps on bgay :D:D
 
Back
Top