- Posts
- 33,452
- Location
- North Shropshire
its my personal mobile
got another call this morning before I'd had breakfast!
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
got another call this morning before I'd had breakfast!
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
And you answered the call?its my personal mobile
- Posts
- 33,452
- Location
- North Shropshire
I suppose it should be kept on silent really but i don't want to miss those hundreds of personal callsAnd you answered the call?
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
Ha ha... you're not THAT popular!
Hippo
Lord Hippo
- Posts
- 53,761
Eye fer got ter teld yer eye had sossij mash unyuns un brokerly last nite. Followed by cadberry chocolate buttons fer afta's. It be the food of kings so it be good enuff fer me.
This be me mortice un tennun. Shows how twistid sum of me wud was. The uvva end is int mortice int uvva side of the fraym. So this be the twist difference across one bit 119cm long. It wur 100x45mm cross sekshun ruff swan cut type wud.
This be me mortice un tennun. Shows how twistid sum of me wud was. The uvva end is int mortice int uvva side of the fraym. So this be the twist difference across one bit 119cm long. It wur 100x45mm cross sekshun ruff swan cut type wud.
Hippo
Lord Hippo
- Posts
- 53,761
Eye plan to put verticle tung n groov boards ont above frayms. Eye have some hinges like below. 6 of em. Won top one bottom on each door. Won int middle up side darn so the door can't be liftid oft the other hooks.
Eye plan ter unda cowt the boards un put on a cowt of gloss paint un fit em ter the frayms. Burreye be wondering how best ter hang the doors. Eye int done this before and they be big doors.
Me initial fort was ter screw some 70x50mm fik wud to the oat side ter attach the hinge to, for each door. A six foot lenf both side. Eye wud them put a thin stip of wud across the door opening and stand me doors on them. Say 10mm tall. Then fit all the holes un bolts in the hope they mount straight and level. Make shore the door is pulled terwatds the wud post each side so there be no slack. Then take away the supporting wud below. What does yer fink? Is there a betterer way of doing this? Should eye only put on the boards the hinges which cover the verticle boards and fit the rest towards the middle where the doors meet, layter on, to make it all lighter or does we fink the frame will drop a bit with the weight so the boards need to be fitted from the beginning?
Eye plan ter unda cowt the boards un put on a cowt of gloss paint un fit em ter the frayms. Burreye be wondering how best ter hang the doors. Eye int done this before and they be big doors.
Me initial fort was ter screw some 70x50mm fik wud to the oat side ter attach the hinge to, for each door. A six foot lenf both side. Eye wud them put a thin stip of wud across the door opening and stand me doors on them. Say 10mm tall. Then fit all the holes un bolts in the hope they mount straight and level. Make shore the door is pulled terwatds the wud post each side so there be no slack. Then take away the supporting wud below. What does yer fink? Is there a betterer way of doing this? Should eye only put on the boards the hinges which cover the verticle boards and fit the rest towards the middle where the doors meet, layter on, to make it all lighter or does we fink the frame will drop a bit with the weight so the boards need to be fitted from the beginning?
- Posts
- 9,087
- Location
- North Lincs
The hinges should be spaced so there are 2 above centre and one below. The lower one is 10 inches from the bottom and the top 5 inches down. The third is usually 5 inches up from centre. It helps with gravity or some such. Yes use a spacer from the floor to give clearance.Eye plan to put verticle tung n groov boards ont above frayms. Eye have some hinges like below. 6 of em. Won top one bottom on each door. Won int middle up side darn so the door can't be liftid oft the other hooks.
Eye plan ter unda cowt the boards un put on a cowt of gloss paint un fit em ter the frayms. Burreye be wondering how best ter hang the doors. Eye int done this before and they be big doors.
Me initial fort was ter screw some 70x50mm fik wud to the oat side ter attach the hinge to, for each door. A six foot lenf both side. Eye wud them put a thin stip of wud across the door opening and stand me doors on them. Say 10mm tall. Then fit all the holes un bolts in the hope they mount straight and level. Make shore the door is pulled terwatds the wud post each side so there be no slack. Then take away the supporting wud below. What does yer fink? Is there a betterer way of doing this? Should eye only put on the boards the hinges which cover the verticle boards and fit the rest towards the middle where the doors meet, layter on, to make it all lighter or does we fink the frame will drop a bit with the weight so the boards need to be fitted from the beginning?
Hicap phill
Well-Known Member
- Posts
- 16,189
- Location
- Wiltshire
Good idea... that means a few weeks grace then.
Luckily the mrs has already thought this & has stacked the landrover up to go to the tip & booked me a slot
- Posts
- 8,982
- Location
- Solent
Hicap phill
Well-Known Member
- Posts
- 16,189
- Location
- Wiltshire
I just organised stuff for next weekend for our anniversary only to find mrs is working on sites Sunday.Don't you just love an organised life?!
Also Thing is I have to empty landrover for Sunday to go to a horse event & throw wood & jumps in the back.
Oh well.....
- Posts
- 33,452
- Location
- North Shropshire
did you get the optional cover for accidentally dropping boiling oil on a guest or just the standard rotten turnips cover?
- Posts
- 8,982
- Location
- Solent
Or having dead cattle catapulted into the back yard?
Hippo
Lord Hippo
- Posts
- 53,761
Eye int teld them about the murder oles. They be brick wurm oles
- Posts
- 16,306
- Location
- Benfleet, Essex
Latest picture from "The House Of Doom".
9 weeks, to get from this......
To this....
Full U/F CH downstairs, new boiler and all new rads and piping elsewhere plus total re-wire & re-plumb.
Thom's a work-demon and hard to keep up with, and it has been very hard work.
Upstairs is just bare rooms with beds in and a mess, but that's for them to sort out as they go along.
9 weeks, to get from this......
To this....
Full U/F CH downstairs, new boiler and all new rads and piping elsewhere plus total re-wire & re-plumb.
Thom's a work-demon and hard to keep up with, and it has been very hard work.
Upstairs is just bare rooms with beds in and a mess, but that's for them to sort out as they go along.
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
Constantly looking at the clock does not make the time go by any quicker.
- Posts
- 6,575
- Location
- uk
In imperial units please. We not in yurrup now
.
- Posts
- 9,087
- Location
- North Lincs
About 78 3/4" X 46 7/8" roughlyIn imperial units please. We not in yurrup now
Hicap phill
Well-Known Member
- Posts
- 16,189
- Location
- Wiltshire
Good evening from Wiltshire.
Made it back.annoyed as sat at last job for 3hrs waiting to be loaded. Then they say off to Scotland. So that’s Sunday night I’m away.easier than waking up stupid o clock Monday morning.
Made it back.annoyed as sat at last job for 3hrs waiting to be loaded. Then they say off to Scotland. So that’s Sunday night I’m away.easier than waking up stupid o clock Monday morning.
Similar threads
