I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 9,087
- Location
- North Lincs
I want some dust extraction for turning and the router. I am thinking of this and putting it on the wall
https://www.axminstertools.com/axminster-craft-ac37e-1hp-extractor-105111
- Posts
- 13,784
- Location
- The Principality
I've got everything crossed for whatever is in the best interests of Itchy.Morning All
Paper's got, dishes cleared cat (singular) fed.
Other cat (Itchy) is in prison awaiting a visit to the Vet @ 09:45.
I hope they can fix her. Not looking forward to the visit TBH.
Then after that it is off to the building-site of doom for the final prep for the plasterers arrival on Thursday.
You all have a great day.
Midweek folks nearly made it to the weekend
So took bike out and went to get me airs cut. Head feels much
Lighter now, last cut was Feb, blimey it’s hot in leather but worth getting dressed once moving and getting the airflow.
Supposed to be getting hotter here over next couple of days great. So will be working out the front of the house as that’s cooler than the back.
Hope Itchy comes good @DanClarke 11 is not that old for a pussy cat.
J
So took bike out and went to get me airs cut. Head feels much
Lighter now, last cut was Feb
, blimey it’s hot in leather but worth getting dressed once moving and getting the airflow.Supposed to be getting hotter here over next couple of days
great. So will be working out the front of the house as that’s cooler than the back.Hope Itchy comes good @DanClarke 11 is not that old for a pussy cat.
J
Hippo
Lord Hippo
- Posts
- 53,761
Reading through the spec it says its for chip eggstraction and shuddnt be eggspected to collect fine dust. So that mayks me fink it wud be ok for turning but not for the fine dust that comes oft a router. When comparing the spec to the next won up at 209 sovs, they're both rated at >30 microns dust. The next one up is also a chip eggstracter but doesn't have a warning for fine dust. Seems er bit odd.
- Posts
- 9,087
- Location
- North Lincs
I can use the vacuum for the router I suppose. I am more into the turning but I want to make a river table so the router will be pressed into service soon!
Hippo
Lord Hippo
- Posts
- 53,761
Yer can ask axminsta online using their chat fing. They have a tec knee cul elp option. They will be able to confirm if it can do fine dust or not.
I keep finkin erbout river taybuls anorl. Lot of peeps putting them ont youtube.
- Posts
- 9,087
- Location
- North Lincs
We have been playing with resin just to see how it goes. We have some confidence now so it's worth the money to give it a go!
(I say we because the Mrs is keen on helping with the project) Resin is not cheap
Hippo
Lord Hippo
- Posts
- 53,761
This chap uses epoxy int different ways. Got sum good results anorl. Levels taybuls wivvit.We have been playing with resin just to see how it goes. We have some confidence now so it's worth the money to give it a go!
(I say we because the Mrs is keen on helping with the project) Resin is not cheap
I hadda luk round previously and the cost is high int the uk. Not sure why. Axminsta have started selling resin but they're asking top prices.
- Posts
- 9,087
- Location
- North Lincs
I just had my hospital consultant phone appointment. I have to go in again in two weeks to have another assessment.
How many times do they need to see me? My condition won't change. There is no miracle cure!
The risk of a hospital visit is, in my opinion, far too high. They are going to do a covid test too
This will be the fourth time since the lockdown I have had to venture to the hospital
How many times do they need to see me? My condition won't change. There is no miracle cure!
The risk of a hospital visit is, in my opinion, far too high. They are going to do a covid test too
This will be the fourth time since the lockdown I have had to venture to the hospital
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
Any Itchy news? @DanClarke
- Posts
- 16,306
- Location
- Benfleet, Essex
Hi Jason,
Thanks for asking. The vet was a bit of a traumatic failure today.
They had the cat all sedated and tried 3 times to get blood samples but her veins just collapsed each time.
We have her back home and she is no better/worse and is still happy to see us.
We are told to take her back next Monday when the head Vet is back in work and he will have a go at extracting some blood for testing.
I have been out most of the day at the building site and have just got back.
- Posts
- 13,784
- Location
- The Principality
Hi Jason,
Thanks for asking. The vet was a bit of a traumatic failure today.
They had the cat all sedated and tried 3 times to get blood samples but her veins just collapsed each time.
We have her back home and she is no better/worse and is still happy to see us.
We are told to take her back next Monday when the head Vet is back in work and he will have a go at extracting some blood for testing.
I have been out most of the day at the building site and have just got back.
DevonGuy
Well-Known Member
- Posts
- 3,124
- Location
- North Devon
Poor bloody cat. I don't even like 'em that much but I really hate to see them in pain or out of sorts. Hoping she rallies over the weekend and that the Boss Vet gets her sorted.Hi Jason,
Thanks for asking. The vet was a bit of a traumatic failure today.
They had the cat all sedated and tried 3 times to get blood samples but her veins just collapsed each time.
We have her back home and she is no better/worse and is still happy to see us.
We are told to take her back next Monday when the head Vet is back in work and he will have a go at extracting some blood for testing.
I have been out most of the day at the building site and have just got back.
- Posts
- 16,306
- Location
- Benfleet, Essex
Thank you, we are keeping our hopes up.Poor bloody cat. I don't even like 'em that much but I really hate to see them in pain or out of sorts. Hoping she rallies over the weekend and that the Boss Vet gets her sorted.
Hicap phill
Well-Known Member
- Posts
- 16,189
- Location
- Wiltshire
Good evening from Wrexham
Now I know wales has some crazy weather but who orders rock salt(for the roads) this time of year. Unless the place is selling it cheap.
Then collected/delivered wood for a power station.
Now have stinky plastic on. Even the forklift driver was heaving.
Now I know wales has some crazy weather but who orders rock salt(for the roads) this time of year. Unless the place is selling it cheap.
Then collected/delivered wood for a power station.
Now have stinky plastic on. Even the forklift driver was heaving.
- Posts
- 16,306
- Location
- Benfleet, Essex
What is "stinky plastic"?
Hicap phill
Well-Known Member
- Posts
- 16,189
- Location
- Wiltshire
Waste plastic from meat processors. So you can imagine the flys...
This is going to a recycle centre.
- Posts
- 16,306
- Location
- Benfleet, Essex
How lovely. I hope you can travel faster than any tail-wind then.
Similar threads
